Invited lecture
| A new accelerated technique for validation of cyclic plasticity models | PAPER |
| Radim Halama, Petr Gál, Zbyněk Paška, Josef Sedlák |
| Buckling analysis of graphene nanosheets by the finite element method | PAPER |
| Jozef Bocko, Pavol Lengvarský |
| Computer analysis of thermal phenomena and deformation in lap joint welded by laser beam | PAPER |
| Wiesława Piekarska, Alżbeta Sapietova, Zbigniew Saternus, Marcin Kubiak |
Conference paper
| Application of vibration method for demage identification of a beam with a variable cross-sectional area | PAPER |
| Izabela Zamorska, Dawid Cekus, Mateusz Miara |
| Load of the slipper-swash plate kinematic pair of an axial piston pump | PAPER |
| Tadeusz Andrzej Złoto, Konrad Dominik Kowalski |
| Numerical computation of the damping and stiffness coefficients of the classical and of the magnetorheological squeeze film damper | PAPER |
| Petr Ferfecki, Jaroslav Zapoměl, Michal Šofer, František Pochylý, Simona Fialová |
| Numerical solution of Rayleigh-Lamb frequency equation for real, imaginary and complex wavenumbers | PAPER |
| Michal Šofer, Petr Ferfecki, Pavel Šofer |
| Numerical modeling of the contact between three-dimensional regions with the use of FEM | PAPER |
| Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak, Leszek Sowa |
| Numerical modeling of heat flow between three-dimensional regions in contact problems | PAPER |
| Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak |
| Heat conduction in a composite sphere - the effect of fractional derivative order on temperature distribution | PAPER |
| Urszula Siedlecka, Stanisław Kukla |
| Stability and vibrations control of a stepped beam using piezoelectric actuation | PAPER |
| Krzysztof Kuliński, Jacek Przybylski |
| Transmuted Weibull distribution and its applications | PAPER |
| Ivana Pobočíková, Zuzana Sedliačková, Mária Michalková |
| Model calculations of posterior reliability indicators for the proposal of the maintenance system | PAPER |
| Jana Galliková, Vladimír Stuchlý, Roman Poprocký, Peter Volna |
| Parametric oscillations of the mechanical systems | PAPER |
| Branislav Ftorek, Pavol Oršanský, Helena Šamajová |
| Calculation of stress in FGM beams | PAPER |
| Justín Murín, Juraj Hrabovský, Vladimír Kutiš |
| An alternative J2 material model with isotropic hardening for coupled thermal-structural finite-strain elastoplastic analyses | PAPER |
| Ladislav Écsi, Pavel Élesztős, Roland Jančo |
| Material property determination of the lining layers of a versatile helmet | PAPER |
| Radek Kottner, Richard Hynek, Tomáš Mandys, Jan Bartošek |
| Analysis of torque cam mechanism | PAPER |
| Iryna Hren, Petr Hejma, Štefan Michna, Martin Svoboda, Josef Soukup |
| Numerical modelling of sandwich panels with a non-continuous soft core | PAPER |
| Jolanta Pozorska |
| Numerical modelling of the rigid polyurethane foam microstructure | PAPER |
| Zbigniew Pozorski |
| Experimental testing of pla biodegradable thermoplastic in the frame of 3d printing fdm technology | PAPER |
| Juraj Beniak, Peter Križan, Miloš Matúš, Michal Šajgalík |
| Structural changes of selected materials for glass industry after thermal loading | PAPER |
| Františka Pešlová, Mariana Janeková, Stanislav Krum |
| Experimental research on biomass cutting process | PAPER |
| Dominik Wilczyński, Krzysztof Talaśka, Ireneusz Malujda, Piotr Jankowiak |
| Smart materials activation analysis on example of nickel and titanium alloys | PAPER |
| Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła, Konrad Waluś, Klaudia Wiesner |
| Study of clay minerals effect on curing characteristics of polymer blends and physical-mechanical properties of prepared vulcanizates | PAPER |
| Beáta Pecušová, Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Andrea Feriancová, Marcel Kohutiar, Ivan Labaj |
| Effect of bentonite modified by silane on rubber blends properties | PAPER |
| Zuzana Mičicová, Slavomíra Božeková, Mariana Pajtášová, Darina Ondrušová |
| Study of new rubber to steel adhesive systems based on Co(II) and Cu(II) sulphides coats | PAPER |
| Ivan Labaj, Darina Ondrušová, Andrej Dubec, Mariana Pajtášová, Marcel Kohutiar, Beáta Pecušová |
| Study of selected thermoplastics using dynamic mechanical analysis | PAPER |
| Marcel Kohutiar, Mariana Pajtášová, Róbert Janík, Iveta Papučová, Jana Pagáčová, Beáta Pecušová, Ivan Labaj |
| Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer | PAPER |
| Michal Sajgalik, Tatiana Czánová, Lucia Zauskova, Mário Drbúl, Marek Sadílek, Jan Valíček |
| Optical atributes influence on mechanical properties of laser cutted PMMA | PAPER |
| Jozef Meško, Rastislav Nigrovič |
| Temperature dependent measurement of internal damping of austenitic stainless steels | PAPER |
| Monika Oravcová, Peter Palček, Mária Chalupová, Milan Uhríčik |
| Porosity formation and fatigue properties of AlSiCu cast alloy | PAPER |
| Lenka Kuchariková, Eva Tillová, Milan Uhríčik, Juraj Belan |
| Study of the fatigue behaviour of synthetic nodular cast irons at low and high frequency cyclic loading | PAPER |
| Alan Vaško, Juraj Belan, Eva Tillová |
| The influence of the structure on the fatigue properties of aluminium alloys for the casting | PAPER |
| Milan Uhríčik, Peter Palček, Mária Chalupová, Martin Frkáň |
| The fractography analysis of IN 718 alloy after three-point flexure fatigue test | PAPER |
| Juraj Belan, Alan Vaško, Lenka Kucharikova, Eva Tillová |
| Experimental investigation of properties of GFRP foam cored sandwich joints | PAPER |
| Jana Gulanová, Matúš Margetin, Papa Birame Gning, Andrej Chribik |
| Analysis of the material configurations and influence on the dynamic response | PAPER |
| Zuzana Murčinková, Michal Halapi |
| Determination of the influence of adherent surface on the adhesive bond strength | PAPER |
| Tomas Kalina, Frantisek Sedlacek, Jan Krystek |
| Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning | PAPER |
| Jan Krystek, Vladislav Laš, Vilém Pompe, Pavlína Hájková |
| A concept of smart multiaxial impact damper made from vacuum packed particles | PAPER |
| Piotr Bartkowski, Robert Zalewski |
| Development of methods for performing the maximum voluntary contraction (MVC) test | PAPER |
| Mateusz Kukla, Bartosz Wieczorek, Łukasz Warguła |
| Influence of geometrical parameters of convergent sleeve on the value of limit stress | PAPER |
| Jan Górecki, Ireneusz Malujda, Krzysztof Talaśka, Dominik Wilczyński, Dominik Wojtkowiak |
| Analysis of the porous bone-implant fixation – experimental verification of numerical model | PAPER |
| Maciej Berdychowski, Janusz Mielniczuk |
| Vibration of the steel frame of the primary sand classifier | PAPER |
| Josef Soukup, Blanka Skočilasová, Jan Skočilas |
| Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding | PAPER |
| Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski, Adam Mroziński |
| Experimental research of vehicle traction properties for reconstruction of traffic accidents | PAPER |
| Marian Dudziak, Andrzej Lewandowski, Michał Śledziński |
| The experimental measurement of the tyre casing defects for the freight vehicles at the dynamic loading | PAPER |
| Ján Vavro, Ján Vavro jr., Petra Kováčiková, Jakub Híreš |
| Studying of cutting conditions when hard turning and their impact on integrity of shaped-complex surfaces | PAPER |
| Jozef Holubjak, Jozef Pilc, Tatiana Czánová, Pavol Martikáň, Dušan Mitaľ, Jozef Mrázik |
| Examples of modern methods of measuring deformations. | PAPER |
| Tomasz Domański |
| Influence of structure sensitising of the AISI 316Ti austenitic stainless steel on the ultra-high cycle fatigue properties | PAPER |
| Michal Jambor, František Nový, Otakar Bokůvka, Libor Trško, Monika Oravcová |
| Influence of microscopic casting defects on fatigue endurance of ductile cast iron | PAPER |
| František Nový, Peter Kopas, Otakar Bokůvka, Michal Jambor, Libor Trško |
| The contribution to the modal analysis using an infrared camera | PAPER |
| Vladimír Dekyš, Zuzana Stankovičová, Pavol Novák, Ondrej Štalmach |
| Shifted axis angular positioning mechanisms – unconventional use of exact constraint design | PAPER |
| Ksawery Szykiedans, Maciej Bujwan |
| Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts | PAPER |
| Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda, Grzegorz Jan Domek |
| The characteristics analysis of torque and rotation speed of working unit of branch grinder - introductory research | PAPER |
| Łukasz Warguła, Jarosław Adamiec, Konrad Waluś, Piotr Krawiec |
| Inelastic damage using continuum damage mechanics in composite plate reinforced by unidirectional fibers | PAPER |
| Milan Žmindák, Martin Dudinský |
| Wear evaluation of elements of V-belt transmission with the application of optical microscope | PAPER |
| Piotr Krawiec, Konrad Waluś, Łukasz Warguła, Jarosław Adamiec |
| Investigation of the effects of the equivalent circuit parameters on induction motor torque using three different equivalent circuit models | PAPER |
| Mehmet Murat Tezcan, Asim Gokhan Yetgin, Ali İhsan Çanakoğlu, Barış Cevher, Mustafa Turan, Murat Ayaz |
| Analysis and modeling of variables of the precise shredder’s pneumatic material transport’s system | PAPER |
| Krzysztof Tyszczuk, Kazimierz Peszyński, Adam Mroziński, Grzegorz Śmigielski |
| Modeling and strength analysis of the prototype of the multi-tasking car trailer | PAPER |
| Bogdan Posiadala, Piotr Ladra |
| Analysis of motion of the three wheeled mobile platform | PAPER |
| Anna Jaskot, Bogdan Posiadala |
| Computer simulation of the load test of an extrusion blow moulded product | PAPER |
| Michał Modławski, Jacek Nabiałek, Tomasz Jaruga |
| The welded CNC machine tool frame | PAPER |
| Piotr Boral, Tadeusz Nieszporek, Rafał Gołębski |
| The material parameters for computational modeling of long-fibre composites with textile | PAPER |
| Jan Krmela, Vladimíra Krmelová |
| The stability analysis of two-wheeled vehicle model | PAPER |
| Juraj Gerlici, Vladimir Sakhno, Alla Yefymenko, Vladimir Verbitskii, Alexandr Kravchenko, Kateryna Kravchenko |
| Diagnosis of machine tool with using Renishaw ballbar system | PAPER |
| Robert Čep, Šárka Malotová, Jiří Kratochvíl, Dana Stančeková, Andrej Czán, Tomáš Jakab |
| Utilization of educational machine tool for training of technical diagnostics based on positioning performance | PAPER |
| Miroslav Císar, Ivan Kuric, Nadežda Čuboňová, Ivan Zajacko, Tomáš Dodok, Anna Rudawska |
| Structural design of soldering station chain conveyor working positions | PAPER |
| Miroslav Blatnický, Ján Dižo, Mária Blatnická |
| Analysis of residual stress in subsurface layers after precision hard machining of forging tools | PAPER |
| Andrej Czán, Jozef Holubjak, Igor Daniš, Juraj Martinček, Matej Mikloš, Robert Čep, Michal Hatala, Šarka Malotová |
| Sensitivity analysis overlaps of friction elements in cartridge seals | PAPER |
| Milan Žmindák, Miloš Falát |
| Localization of delamination in composite test specimens. | PAPER |
| Milan Sapieta, Peter Šulka, Martin Svoboda |
| Design of pallet, frame and chain of soldering station conveyor | PAPER |
| Mária Blatnická, Milan Sága, Miroslav Blatnický |
| Passive safety system for small unmanned aerial vehicles | PAPER |
| Piotr Bartkowski, Robert Zalewski |
| Universal compact lower limb turning module intended for use in orthotic robots | PAPER |
| Mateusz Janowski, Danuta Jasińska-Choromańska, Dymitr Osiński, Marcin Zaczyk |
| Analysis of inertial amplification mechanisms with smart spring-damper for attenuation of beam vibrations | PAPER |
| Mateusz Barys, Robert Zalewski |
| Electromagnetic angular positioner based on DC micromotor | PAPER |
| Maciej Bodnicki, Jakub Wierciak, Wojciech Credo, Karol Bagiński, Leszek Wawrzyniuk |
| Comparation of the impact of selected technical gases on properties of a pneumatic flexible coupling | PAPER |
| Robert Grega, Jozef Krajňak, Daniela Harachová |
| Assessment of a rail vehicle running with the damaged wheel on a ride comfort for passengers | PAPER |
| Ján Dižo, Miroslav Blatnický, Stasys Steišūnas, Blanka Skočilasová |
| Analysis of transverse vibration and stability issues of discrete-continuous elastic systems with nonlinearly variable parameters | PAPER |
| Jerzy Jaroszewicz, Łukasz Dragun |
| Free vibration analysis of a DST-0285 truck crane considering changes in the system load configuration | PAPER |
| Tomasz Geisler |
| Kinematic and dynamic analysis and distribution of stress for six-item mechanism | PAPER |
| Ján Vavro jr., Ján Vavro, Petra Kováčiková, Juliána Vršková |
| Kinematic and dynamic analysis and distribution of stress for four-item mechanism | PAPER |
| Ján Vavro jr., Ján Vavro, Petra Kováčiková, Juliána Vršková |
| The assessment of the integration methods for the rail vehicle ride dynamics solution | PAPER |
| Tomáš Lack, Juraj Gerlici |
| Innovative wheel tread design aimed to tramcar-track interaction improvement when passing curves of a small radius | PAPER |
| Vladimír Hauser, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, Tomáš Lack |
| Wear research of railway wheelset profile by using computer simulation | PAPER |
| Lukáš Smetanka, Pavol Šťastniak, Jozef Harušinec |
| Analysis and synthesis parameters influencing to the effects of impact | PAPER |
| Peter Šulka, Alžbeta Sapietová, Vladimir Dekýš, Milan Sapieta |
| Method of controlling innovative articulation for articulated vehicle | PAPER |
| Mateusz Szumilas, Sergiusz Łuczak, Maciej Bodnicki, Marcin Stożek, Tomasz Załuski |
| Improving the quality of cutting flat glass | PAPER |
| Martin Svoboda, Josef Soukup, Milan Sapieta |
| Timing belt in power transmission and conveying system | PAPER |
| Grzegorz Jan Domek, Piotr Krawiec, Michał Wilczyński |
| Use of risk assessment methods in maintenance for a more reliable rolling stock operation | PAPER |
| Juraj Grenčík, Roman Poprocký, Jana Galliková, Peter Volna |
| Design of stirling engine operating at low temperature difference | PAPER |
| Josef Sedlák, Adam Glváč, Andrej Czán |
| Numerical modeling of heat flows in the upper blast furnace of the electric arc furnace | PAPER |
| Richard Lenhard, Milan Malcho, Peter Ďurčanský, Katarína Kaduchová |
| Heat flow and heat transfer coefficient during crystallization under the pressure | PAPER |
| Richard Pastirčák, Ján Ščury, Tomáš Fecura |
| The effect of the gantry crane beam cross section on the level of generated stresses | PAPER |
| Leszek Sowa, Tomasz Skrzypczak, Paweł Kwiatoń |
| Analysis of stress and deformation fields of shape complex beams | PAPER |
| Miroslav Pástor, Pavol Lengvarský |
| Transformation of heat into mechanical energy by means of rotating systems | PAPER |
| Marian Mešina |
| Discrete element method approach to modelling VPP dampers | PAPER |
| Paweł Chodkiewicz, Jakub Lengiewicz, Robert Zalewski |
| Case study of technological problems arising from the use of new material, DOMEX steel sheet, on the components of the mower discs on the example of the production company SaMASZ Sp. Z o.o. | PAPER |
| Damian Kułak, Jerzy Jaroszewicz, Marcin Woronko |
| Polyurethane foam behaviour during impact | PAPER |
| Stanislav Špirk, Michal Křížek, Štěpán Jeníček |
| Prediction of modal properties of circular disc with pre-stressed fields | PAPER |
| Milan Naď, Rastislav Ďuriš, Tibor Nánási |
| Study of the prototype mechanism of height adjustment of the bed in hospital bed | PAPER |
| Ireneusz Malujda, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak, Maciej Szulc |
| Numerical research of biomechanical system with SMA prosthesis | PAPER |
| Andrzej Mitura, Rafal Rusinek |
| Modelling of the road traffic noise | PAPER |
| Andrzej Bakowski, Leszek Radziszewski, Vladimír Dekýš |
| Missing values reconstruction in sound level monitoring station by means of intelligent computing | PAPER |
| Leszek Radziszewski, Michał Kekez, Alžbeta Sapietová |
| Stimulation of nerve endings via medical device | PAPER |
| Antonin Svoboda, Josef Soukup |
| Identifying the cause of cutting tool failure by using simulation software | PAPER |
| Andrej Zrak, Radoslav Koňár |
| The effect of restraints type on the generated stresses in gantry crane beam | PAPER |
| Leszek Sowa, Wiesława Piekarska, Tomasz Skrzypczak, Paweł Kwiatoń |
| Forced convection and heat transfer around a bounded cylinder | PAPER |
| Blanka Skočilasová, Jan Skočilas, Josef Soukup |
| Thermal load non-uniformity estimation for superheater tube bundle damage evaluation | PAPER |
| Martin Naď, Zdeněk Jegla, Tomáš Létal, Pavel Lošák, Jiří Buzík |
| Analysis of deformation and microstructure evolution during the hot deformation of titanium alloy | PAPER |
| Marcin Kukuryk, Jerzy Winczek |
| The use of CAD applications in the design of shredders for polymers | PAPER |
| Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski, Józef Flizikowski, Adam Mroziński |
| Evaluation of the technical condition of medium-sized boilers | PAPER |
| Pavel Lošák, Tomáš Létal, Jiří Buzík, Martin Naď |
| Analytical model of stress field in submerged arc welding butt joint with thorough penetration | PAPER |
| Jerzy Winczek, Ryszard Parkitny, Krzysztof Makles, Marcin Kukuryk |
| Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials | PAPER |
| Zbigniew Saternus, Wiesława Piekarska, Marcin Kubiak, Tomasz Domański, Dorota Goszczyńska-Króliszewska |
| Computer simulations of thermal phenomena in surface heating process using the real distribution of Yb:YAG laser power | PAPER |
| Marcin Kubiak, Vladimír Dekýš, Tomasz Domański, Pavol Novák, Zbigniew Saternus |
| Computer simulation of thermoforming process and its verification using a rapid tooling mould | PAPER |
| Michał Modławski, Tomasz Jaruga |
| Numerical modelling of caustics of solid state disk lasers | PAPER |
| Marcin Kubiak |
| Application of analytical methods for determination of hardness distribution in welded joint made of S1100QL steel | PAPER |
| Wiesława Piekarska, Milan Sága, Dorota Goszczyńska-Króliszewska, Tomasz Domański, Peter Kopas |
| Numerical analysis of laser welding with consideration of analytical methods of determination of phase transformations and mechanical properties of welded joints | PAPER |
| Wiesława Piekarska, Dorota Goszczyńska-Króliszewska, Zbigniew Saternus, Tomasz Domański, Marcin Kubiak |
| The role of inflow boundary layer thickness for numerical modelling of flow around bluff bodies of built-up areas | PAPER |
| Renata Gnatowska |
| Modelling mechanical properties of the multilayer composite materials with the polyamide core | PAPER |
| Krzysztof Talaśka, Dominik Wojtkowiak |
| Engineering calculations for complex geometric domains | PAPER |
| Elżbieta Gawrońska, Robert Dyja, Andrzej Grosser, Jerzy Winczek |
| A computer simulation of solidification taking into account the movement of the liquid phase | PAPER |
| Robert Dyja, Elzbieta Gawronska, Andrzej Grosser |
| Numerical simulations of progressive hardening by using ABAQUS FEA software. | PAPER |
| Tomasz Domański, Wiesława Piekarska, Marcin Kubiak, Zbigniew Saternus, Dorota Goszczyńska-Króliszewska |
| Analysis of the distribution of temperature fields in the braked railway wheel | PAPER |
| Andrej Suchánek, Jozef Harušinec, Mária Loulová, Peter Strážovec |
| Computer aided structural analysis of newly developed railway bogie frame | PAPER |
| Pavol Šťastniak, Marián Moravčík, Peter Baran, Lukáš Smetanka |
| Numerical modal analysis for vibration-damping properties of ductile cast | PAPER |
| Petra Kováčiková, Ján Vavro, Ján Vavro jr., Andrej Dubec |
| Simulation of solidification during crystallisation under pressure | PAPER |
| Richard Pastirčák, Marek Brůna, Dana Bolibruchová |
| Finite element simulation of laser cutting process of stell sheet | PAPER |
| Jozef Meško, Andrej Zrak, Rastislav Nigrovič, Milan Žmindák |
| Noise and temperature reduction in the contact of tribological elements during braking | PAPER |
| Juraj Gerlici, Mykola Gorbunov, Kateryna Kravchenko, Olga Prosvirova, Tomas Lack |
| Lap weld joint modelling and simulation of welding in programme SYSWELD | PAPER |
| Radoslav Koňár, Miloš Mičian, Andrej Zrak |
| Design of a device to simulate environmental influences on the course of brake tests | PAPER |
| Jozef Harušinec, Andrej Suchánek, Mária Loulová, Peter Strážovec |
| Simulation of sound transmission through the porous material, determining the parameters of acoustic absorption and sound reduction | PAPER |
| Peter Zvolenský, Juraj Grenčík, Ľubomír Kašiar, Vladimír Stuchlý |
| The space distribution and transfer of positioning errors from actuators to the TCP point of parallel mechanism | PAPER |
| Vladimír Bulej, Ján Stanček, Ivan Kuric, Ivan Zajačko |
| Flap casting of turbine engine optimalization by numerical simulation | PAPER |
| Marek Brůna, Anna Remišová |
| Investigation of kinematic parameters of two nonconventional piston machines with wobble board | PAPER |
| Peter Baran, Pavol Šťastniak, Pavol Kukuča, Miloš Brezáni |
| Selection of optimal solution heat treatment of the casting cylinder heads | PAPER |
| Eva Tillová, Mária Chalupová, Lenka Kuchariková, Juraj Belan, Denisa Závodská |
| Determination the maximum load capacity of the welded structure of the transport carriage in operation | PAPER |
| Vladislav Baniari, Marián Handrik, Milan Vaško, Ján Kortiš, Ľuboš Daniel |
| Cooperation of axisymmetic connection elements under dynamic load | PAPER |
| Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka |
| The determination of the wormwheel toothing surface | PAPER |
| Tadeusz Nieszporek, Rafał Gołębski, Piotr Boral |
| Measurement system for special surface mapping using miniature displacement sensors | PAPER |
| Martyna Zowade, Maciej Bodnicki |
| Novel algorithm for tilt measurements using MEMS accelerometers | PAPER |
| Sergiusz Łuczak |
| The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys | PAPER |
| Piotr Krawiec, Grzegorz Jan Domek, Łukasz Warguła, Konrad Waluś, Jarosław Adamiec |
| Y25 freight car bogie models properties analysis by means of computer simulations | PAPER |
| Tomáš Lack, Juraj Gerlici |
| Calculated estimation of railway wheels equivalent conicity influence on critical speed of railway passenger car | PAPER |
| Juraj Gerlici, Rostyslav Domin, Ganna Cherniak, Tomáš Lack |
| The development of diagnostics methodological principles of the railway rolling stock on the basis of the analysis of dynamic vibration processes of the rail | PAPER |
| Juraj Gerlici, Olena Nozhenko, Ganna Cherniak, Mykola Gorbunov, Rostyslav Domin, Tomáš Lack |
| Car body and bogie connection modification for track curves passability improvement | PAPER |
| Vladimír Hauser, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, Tomáš Lack |
| Effect of the pressed ceramic filters on the reoxidation processes | PAPER |
| Marek Brůna, Dana Bolibruchová, Richard Pastirčák |
| Use of waste materials in rubber matrix | PAPER |
| Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Slavomíra Božeková, Róbert Janík, Beáta Pecušová, Lukáš Raník |
| Modification of alternative additives and their effect on the rubber properties | PAPER |
| Darina Ondrušová, Slavomíra Božeková, Lenka Buňová, Mariana Pajtášová, Ivan Labaj, Andrej Dubec, Juliána Vršková |
| Low-cycle fatigue behaviour of laser welded high-strength steel DOMEX 700 MC | PAPER |
| Peter Kopas, Milan Sága, František Nový, Bohuš Leitner |
| Probability analysis of dynamical effects of axial piston hydraulic motor | PAPER |
| Alžbeta Sapietová, Vladimír Dekýš, Milan Sapieta, Peter Šulka, Lukas Gajdos, Isabela Rojek |
| Numerical simulation of blanking process | PAPER |
| Peter Pecháč, Milan Sága |
| Analysis of the influence of the pipe’s wall thickness on the corrugation of the surface during inductive bending of pipes | PAPER |
| Milan Sága, Marián Handrik, Peter Kopas, Maroš Tropp |
| Experimental casting of forging ingots from model material | PAPER |
| Ján Moravec, Peter Kopas, Lenka Jakubovičová, Bohuš Leitner |
| Numerical analysis of stiffener for hybrid drive unite | PAPER |
| Lenka Jakubovičová, Milan Sága, Marián Handrik |
| The damage analysis of the reinforced concrete beam and the prestressed reinforced concrete beam | PAPER |
| Milan Vaško, Marián Handrik, Matej Rác, Vladislav Baniari, Ján Kortiš, Ľuboš Daniel |
| Parallelization of computational algorithms for optimization problems with high time consumption | PAPER |
| Milan Vaško, Marián Handrik, Alžbeta Sapietová, Jana Handriková |
| Euler-Lagrange optimization of electric drives with DTM method | PAPER |
| Pavol Oršanský, Branislav Ftorek, Helena Šamajová, Ján Vittek |
| Contribution to numerical study of vehicle vertical stochastic vibration | PAPER |
| Alžbeta Sapietová, Milan Sága, Dana Stančeková, Milan Sapieta |
| Contribution to fatigue damage prediction of thin shell finite element models | PAPER |
| Milan Sága, Milan Vaško, Peter Kopas, Wiesława Piekarska, Tomasz Domański, Marcin Kubiak |
| Monitoring the fatigue crack on the test specimen during the cyclic loading. | PAPER |
| Milan Sapieta, Peter Šulka, Martin Svoboda |
| Design of a computational model for multi-body contact of deformable bodies in the flowing fluid | PAPER |
| Marián Handrik, Milan Vaško |
| Use of the BOINC system for distributed data collection in the "Internet of Things" | PAPER |
| Marián Handrik, Jana Handriková, Lenka Jakubovičová |
| Fatigue life prediction of mechanical structures under stochastic loading | PAPER |
| Bohus Leitner, Lucia Figuli |
| Fatigue limit estimation using IR camera | PAPER |
| Zuzana Stankovičová, Vladimír Dekýš, Milan Uhríčik, Pavol Novák, Bohumír Strnadel |
| Experimental and computational comparative study of the specimens loaded by bending and torsion | PAPER |
| Lenka Jakubovičová, Milan Vaško, Milan Sága, Peter Kopas |
This work is licensed under a Creative Commons Attribution 4.0 License.
Web page supported by Univerzity of Žilina.