Browse Title Index


 
Scheduled Conference Title
 
Machine Modeling and Simulations 2019 3D simulations of solidification with liquid phase flow Abstract
Elżbieta Gawrońska, Robert Dyja
 
Machine Modeling and Simulations 2019 3D technology implementation in medicine Abstract
Marek Macko, Zbigniew Szczepański, Dariusz Mikołajewski, Emilia Mikołajewska, Jacek Furtak
 
Machine Modeling and Simulations 2018 A Computational Fluid Dynamics Investigation of the Integral Squeeze Film Damper Abstract
Petr Ferfecki, Jaroslav Zapoměl, Marek Gebauer, Václav Polreich, Zdeněk Kubín
 
Machine Modeling and Simulations 2017 A computer simulation of solidification taking into account the movement of the liquid phase Abstract
Robert Dyja, Elzbieta Gawronska, Andrzej Grosser
 
Machine Modeling and Simulations 2017 A concept of smart multiaxial impact damper made from vacuum packed particles Abstract
Piotr Bartkowski, Robert Zalewski
 
Machine Modeling and Simulations 2017 A new accelerated technique for validation of cyclic plasticity models Abstract
Radim Halama, Petr Gál, Zbyněk Paška, Josef Sedlák
 
Machine Modeling and Simulations 2018 A working design of a bulldozer blade as additional equipment of a compaction drum roller Abstract
Jarosław Selech, Dariusz Ulbrich, Konrad Włodarczyk, Żaneta Staszak, Jacek Marcinkiewicz, Dawid Romek, Bartosz Baran
 
Machine Modeling and Simulations 2017 An alternative J2 material model with isotropic hardening for coupled thermal-structural finite-strain elastoplastic analyses Abstract
Ladislav Écsi, Pavel Élesztős, Roland Jančo
 
Machine Modeling and Simulations 2019 An application of the Kalman filter in automated guided vehicles Abstract
Magdalena Dobrzanska, Pawel Dobrzanski
 
Machine Modeling and Simulations 2017 Analysis and modeling of variables of the precise shredder’s pneumatic material transport’s system Abstract
Krzysztof Tyszczuk, Kazimierz Peszyński, Adam Mroziński, Grzegorz Śmigielski
 
Machine Modeling and Simulations 2019 Analysis and structuring diagnostic large volume data of technical condition of complex equipment in transport Abstract
Vladimir Vychuzhanin, Nickola Rudnichenko, Zuzana Sagova, Miroslaw Smieszek, Vasyl Cherniavskyi, Andrii Golovan, Mykyta Volodarets
 
Machine Modeling and Simulations 2017 Analysis and synthesis parameters influencing to the effects of impact Abstract
Peter Šulka, Alžbeta Sapietová, Vladimir Dekýš, Milan Sapieta
 
Machine Modeling and Simulations 2018 Analysis of a cross-flow influence for a turbulence progress in a initial segment of axisymmetric duct Abstract
Wojciech Robert Judt, Jarosław Bartoszewicz
 
Machine Modeling and Simulations 2018 Analysis of a tram car ride when passing point frog and when entering curve by specific rail geometry Abstract
Vladimír Hauser, Juraj Gerlici, Kateryna Kravchenko, Tomáš Lack, Mária Loulová
 
Machine Modeling and Simulations 2019 Analysis of angular deflection of bearing node in machine with toothed transport belt Abstract
Maciej Berdychowski, Ireneusz Malujda, Krzysztof Wałęsa, Aleksandra Fierek
 
Machine Modeling and Simulations 2018 Analysis of deformation and microstructure evolution during the cogging process of waspaloy alloy Abstract
Marcin Kukuryk, Jerzy Winczek, Marek Gucwa
 
Machine Modeling and Simulations 2017 Analysis of deformation and microstructure evolution during the hot deformation of titanium alloy Abstract
Marcin Kukuryk, Jerzy Winczek
 
Machine Modeling and Simulations 2018 Analysis of driving properties of a three-wheeled vehicle with a newly designed steering system Abstract
Ján Dižo, Miroslav Blatnický, Pavol Kurčík
 
Machine Modeling and Simulations 2019 Analysis of heat transfer coefficients for simulation of the heat exchange between oil and the internal cavity faces of the isolated piston at variable gravity conditions Abstract
Aleksandr Bilohub, Nguyen Van Duong, Feliks Sirenko, Volodymyr Savchuk, Ievgen Bilousov, Roman Symonenko, Ivan Zajačko
 
Machine Modeling and Simulations 2017 Analysis of inertial amplification mechanisms with smart spring-damper for attenuation of beam vibrations Abstract
Mateusz Barys, Robert Zalewski
 
Machine Modeling and Simulations 2017 Analysis of motion of the three wheeled mobile platform Abstract
Anna Jaskot, Bogdan Posiadala
 
Machine Modeling and Simulations 2018 Analysis of reinforcement of the tooth belts Abstract
Michał Wilczyński, Grzegorz Domek
 
Machine Modeling and Simulations 2017 Analysis of residual stress in subsurface layers after precision hard machining of forging tools Abstract
Andrej Czán, Jozef Holubjak, Igor Daniš, Juraj Martinček, Matej Mikloš, Robert Čep, Michal Hatala, Šarka Malotová
 
Machine Modeling and Simulations 2019 Analysis of residual stresses of aging austenitic steel designed for nuclear industry Abstract
Michal Sajgalik, Jozef Holubjak, Ondrej Kubala, Michal Richtarik, Tatiana Czanova, Mario Drbul
 
Machine Modeling and Simulations 2019 Analysis of residual stresses on guide bar of chainsaw Abstract
Ján Kostka, Peter Čarák, Peter Frankovský, Matúš Adamuščin
 
Machine Modeling and Simulations 2021 Analysis of Selected Properties of Powdered Compacts Abstract
Denisa Olekšáková
 
Machine Modeling and Simulations 2019 Analysis of shaft selection in terms of stiffness and mass Abstract
Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2019 Analysis of size of shredded particles in a multi-disc grinder Abstract
G Smigielski, Krzysztof Tyszczuk, A Mroziński
 
Machine Modeling and Simulations 2019 Analysis of stability of stressed-skin constructions for transport of bulk raw materials Abstract
Marian Dudziak, Paweł Knast, Krzysztof Talaśka
 
Machine Modeling and Simulations 2017 Analysis of stress and deformation fields of shape complex beams Abstract
Miroslav Pástor, Pavol Lengvarský
 
Machine Modeling and Simulations 2017 Analysis of the distribution of temperature fields in the braked railway wheel Abstract
Andrej Suchánek, Jozef Harušinec, Mária Loulová, Peter Strážovec
 
Machine Modeling and Simulations 2018 Analysis of the friction (spin) welding - preliminary study Abstract
Michał Pietrzak, Krzysztof Wałęsa, Jan Górecki, Dominik Wilczyński, Maciej Berdychowski, Ireneusz Malujda
 
Machine Modeling and Simulations 2019 Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Maciej Berdychowski
 
Machine Modeling and Simulations 2017 Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda, Grzegorz Jan Domek
 
Machine Modeling and Simulations 2017 Analysis of the influence of the pipe’s wall thickness on the corrugation of the surface during inductive bending of pipes Abstract
Milan Sága, Marián Handrik, Peter Kopas, Maroš Tropp
 
Machine Modeling and Simulations 2018 Analysis of the loss of vehicle motion stability in the conditions of steering control disturbance Abstract
Andrzej Lewandowski, Marian Dudziak, Michał Śledziński
 
Machine Modeling and Simulations 2017 Analysis of the material configurations and influence on the dynamic response Abstract
Zuzana Murčinková, Michal Halapi
 
Machine Modeling and Simulations 2017 Analysis of the porous bone-implant fixation – experimental verification of numerical model Abstract
Maciej Berdychowski, Janusz Mielniczuk
 
Machine Modeling and Simulations 2019 Analysis of threaded connections under impact load Abstract
Krzysztof Talaśka, Dominik Wojtkowiak
 
Machine Modeling and Simulations 2017 Analysis of torque cam mechanism Abstract
Iryna Hren, Petr Hejma, Štefan Michna, Martin Svoboda, Josef Soukup
 
Machine Modeling and Simulations 2017 Analysis of transverse vibration and stability issues of discrete-continuous elastic systems with nonlinearly variable parameters Abstract
Jerzy Jaroszewicz, Łukasz Dragun
 
Machine Modeling and Simulations 2017 Analytical model of stress field in submerged arc welding butt joint with thorough penetration Abstract
Jerzy Winczek, Ryszard Parkitny, Krzysztof Makles, Marcin Kukuryk
 
Machine Modeling and Simulations 2019 Application of alternative additives in the polymer composite systems used in automotive industry Abstract
Darina Ondrušová, Ivan Labaj, Juliána Vršková, Mariana Pajtášová, V Zvoláneková Mezencevová
 
Machine Modeling and Simulations 2017 Application of analytical methods for determination of hardness distribution in welded joint made of S1100QL steel Abstract
Wiesława Piekarska, Milan Sága, Dorota Goszczyńska-Króliszewska, Tomasz Domański, Peter Kopas
 
Machine Modeling and Simulations 2018 Application of Design of Experiment to a FCAW Process Abstract
Piotr Kordas, Robert Bęczkowski, Marek Gucwa, Jerzy Winczek
 
Machine Modeling and Simulations 2018 Application of selected computational intelligence methods to sound level modeling based on traffic intensity in thoroughfare Abstract
Michał Kekez
 
Machine Modeling and Simulations 2019 Application of the Mohr-Coulomb model for the simulation of the biomass compaction process Abstract
Maciej Berdychowski, Krzysztof Talaśka, Ireneusz Malujda, Mateusz Kukla
 
Machine Modeling and Simulations 2017 Application of vibration method for demage identification of a beam with a variable cross-sectional area Abstract
Izabela Zamorska, Dawid Cekus, Mateusz Miara
 
Machine Modeling and Simulations 2017 Assessment of a rail vehicle running with the damaged wheel on a ride comfort for passengers Abstract
Ján Dižo, Miroslav Blatnický, Stasys Steišūnas, Blanka Skočilasová
 
Machine Modeling and Simulations 2021 Assessment of the suitability of an gate design modification compared to the change in pressing velocity considering the distribution of gases in the casting volume Abstract
Ján Majerník, Mirosław Tupaj, Andrzej Trytek, Martin Podařil
 
Machine Modeling and Simulations 2019 Assessment of traffic noise for medium heavy vehicles in octave bands Abstract
Andrzej Bąkowski, Vladimir Dekýš, Leszek Radziszewski, Paweł Świetlik
 
Machine Modeling and Simulations 2018 Assessment of variability of acoustical energy generated by traffic volume Abstract
Andrzej Bąkowski
 
Machine Modeling and Simulations 2019 Biomass cutting tests to determine the lowest value of the process force Abstract
Dominik Wilczyński, Krzysztof Wałęsa, Maciej Berdychowski, Mateusz Kukla
 
Machine Modeling and Simulations 2017 Buckling analysis of graphene nanosheets by the finite element method Abstract
Jozef Bocko, Pavol Lengvarský
 
Machine Modeling and Simulations 2019 CAE analysis and simulations of technological processes of selected high strength steels Abstract
Jozef Majerík, Igor Barényi, Michal Ladecký, Michal Krbaťa
 
Machine Modeling and Simulations 2017 Calculated estimation of railway wheels equivalent conicity influence on critical speed of railway passenger car Abstract
Juraj Gerlici, Rostyslav Domin, Ganna Cherniak, Tomáš Lack
 
Machine Modeling and Simulations 2019 Calculation of stiffness of triple spring in a rail vehicle Abstract
Andrej Suchánek, Mária Loulová
 
Machine Modeling and Simulations 2017 Calculation of stress in FGM beams Abstract
Justín Murín, Juraj Hrabovský, Vladimír Kutiš
 
Machine Modeling and Simulations 2018 Camming design for test equipment Abstract
Petr Hejma, Iryna Hren, Jan Sviantek, Josef Soukup, Martin Svoboda
 
Machine Modeling and Simulations 2017 Car body and bogie connection modification for track curves passability improvement Abstract
Vladimír Hauser, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, Tomáš Lack
 
Machine Modeling and Simulations 2017 Case study of technological problems arising from the use of new material, DOMEX steel sheet, on the components of the mower discs on the example of the production company SaMASZ Sp. Z o.o. Abstract
Damian Kułak, Jerzy Jaroszewicz, Marcin Woronko
 
Machine Modeling and Simulations 2018 Circular and quasi circular paths for the industrial robots measuring with the Renishaw Ballbar QC20-W Abstract
Vladimír Tlach, Zuzana Ságová, Ivan Kuric
 
Machine Modeling and Simulations 2017 Comparation of the impact of selected technical gases on properties of a pneumatic flexible coupling Abstract
Robert Grega, Jozef Krajňak, Daniela Harachová
 
Machine Modeling and Simulations 2018 Comparison of analytical and numerical solution of bearing contact analysis Abstract
Peter Šulka, Alžbeta Sapietová, Vladimír Dekýš, Milan Sapieta
 
Machine Modeling and Simulations 2019 Comparison of experimental flexural test with FE analysis for specimen with different size and shape of internal structure created by 3D printing's Abstract
Filip Dorčiak, Milan Vaško, František Bárnik, Jaroslav Majko
 
Machine Modeling and Simulations 2018 Comparison of FE analysis and experimentally obtained data for the identification of residual stresses in welded high-strength steels Abstract
Milan Vaško, Vladislav Baniari, Marián Handrik, Alan Vaško, Lenka Jakubovičová, Peter Kopas
 
Machine Modeling and Simulations 2019 Complex designing of granulation units with application of computer and software modeling: case "Vortex granulator" Abstract
Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová
 
Machine Modeling and Simulations 2019 Computation of temperature field by cell method and comparing with commercial software Abstract
Marek Pernica, Tomáš Létal, Pavel Lošák, Martin Naď
 
Machine Modeling and Simulations 2017 Computer aided structural analysis of newly developed railway bogie frame Abstract
Pavol Šťastniak, Marián Moravčík, Peter Baran, Lukáš Smetanka
 
Machine Modeling and Simulations 2017 Computer analysis of thermal phenomena and deformation in lap joint welded by laser beam Abstract
Wiesława Piekarska, Alżbeta Sapietova, Zbigniew Saternus, Marcin Kubiak
 
Machine Modeling and Simulations 2018 Computer evaluation of the influence of liquid metal movements on defects formation in the casting Abstract
Leszek Sowa, Tomasz Skrzypczak, Paweł Kwiatoń
 
Machine Modeling and Simulations 2017 Computer simulation of the load test of an extrusion blow moulded product Abstract
Michał Modławski, Jacek Nabiałek, Tomasz Jaruga
 
Machine Modeling and Simulations 2017 Computer simulation of thermoforming process and its verification using a rapid tooling mould Abstract
Michał Modławski, Tomasz Jaruga
 
Machine Modeling and Simulations 2017 Computer simulations of thermal phenomena in surface heating process using the real distribution of Yb:YAG laser power Abstract
Marcin Kubiak, Vladimír Dekýš, Tomasz Domański, Pavol Novák, Zbigniew Saternus
 
Machine Modeling and Simulations 2019 Construction design and structural analyse of transfer system Abstract
Lenka Jakubovičová, Peter Kopas, Marián Handrik, Milan Vaško, Róbert Grega, Peter Šulka
 
Machine Modeling and Simulations 2019 Construction proposal of shipping bulk container Abstract
ROBERT POKLEMBA, J Zajac, D Goldyniak, I Olexa, M Dilýová
 
Machine Modeling and Simulations 2017 Contribution to fatigue damage prediction of thin shell finite element models Abstract
Milan Sága, Milan Vaško, Peter Kopas, Wiesława Piekarska, Tomasz Domański, Marcin Kubiak
 
Machine Modeling and Simulations 2017 Contribution to numerical study of vehicle vertical stochastic vibration Abstract
Alžbeta Sapietová, Milan Sága, Dana Stančeková, Milan Sapieta
 
Machine Modeling and Simulations 2018 Control issues of a fast piezoelectric driven positioner intended for deflection of a high power laser beam Abstract
Michal Bartys
 
Machine Modeling and Simulations 2019 Control of the TTM positioner based on correcting procedures Abstract
Maciej Bodnicki, Wojciech Credo, Karol Bagiński, Michał Bartyś, Leszek Wawrzyniuk
 
Machine Modeling and Simulations 2018 Conversion of data from the laser scanner to the Ansys Workbench Abstract
Ondrej Štalmach, Alžbeta Sapietová, Vladimír Dekýš, Peter Šulka, Lukáš Gajdoš
 
Machine Modeling and Simulations 2017 Cooperation of axisymmetic connection elements under dynamic load Abstract
Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2018 Correlation image system 3D Dantec as a modern system for measuring deformation Abstract
Tomasz Domański
 
Machine Modeling and Simulations 2018 Creation of prototype 3D models using RAPID PROTOTYPING Abstract
Jozef Harušinec, Mária Loulová, Andrej Suchánek
 
Machine Modeling and Simulations 2018 Damping in magnetorheological elastomers subjected to compressive stress Abstract
Mateusz Kukla, Ireneusz Malujda, Krzysztof Talaśka
 
Machine Modeling and Simulations 2018 Defining of the variable rail geometry for vehicle dynamic simulation Abstract
Vladimír Hauser, Juraj Gerlici, Kateryna Kravchenko, Tomáš Lack, Mária Loulová, Olha Aleksandrovna Potapenko
 
Machine Modeling and Simulations 2018 DEM simulation research of selected sowing unit elements used in a mechanical seeding drill Abstract
Jacek Marcinkiewicz, Jarosław Selech, Żaneta Staszak, Łukasz Gierz, Dariusz Ulbrich, Dawid Romek
 
Machine Modeling and Simulations 2018 Dependence of the Cross Section of the Cut Layer on the Specific Cutting Resistance Abstract
Jana Petrů
 
Machine Modeling and Simulations 2018 Design and manufacture of artificial organs made of polymers Abstract
Marek Macko, Zbigniew Szczepanski, Dariusz Mikolajewski, Joanna Nowak, Emilia Mikołajewska, Jacek Furtak
 
Machine Modeling and Simulations 2018 Design and strength analysis of mechanical rack system Abstract
Mária Blatnická, Milan Sága, Miroslav Blatnický
 
Machine Modeling and Simulations 2018 Design and stress analysis of wheeled compactor construction Abstract
Lenka Jakubovičová, Milan Vaško, Milan Sága, Peter Kopas, Pavol Novák, Marián Handrik
 
Machine Modeling and Simulations 2017 Design of a computational model for multi-body contact of deformable bodies in the flowing fluid Abstract
Marián Handrik, Milan Vaško
 
Machine Modeling and Simulations 2018 Design of a cultivator mounted on a tractor with a power of up to 20 kW Abstract
Jarosław Selech, Dariusz Ulbrich, Wojciech Kęska, Żaneta Staszak, Jacek Marcinkiewicz, Dawid Romek, Przemysław Rogoziński
 
Machine Modeling and Simulations 2017 Design of a device to simulate environmental influences on the course of brake tests Abstract
Jozef Harušinec, Andrej Suchánek, Mária Loulová, Peter Strážovec
 
Machine Modeling and Simulations 2018 Design of a prototype frame of an electrically driven three-wheel vehicle Abstract
Jozef Harušinec, Andrej Suchánek, Mária Loulová, Pavol Kurčík
 
Machine Modeling and Simulations 2018 Design of mechatronic unit for application of coats of adhesive Abstract
Aleksandra Fierek, Ireneusz Malujda, Krzysztof Talaśka
 
Machine Modeling and Simulations 2019 Design of new multifunctional clamping jaws for thermomechanical simulator Abstract
Tomas Kalina, Vaclav Marek, Stepan Jenicek, Frantisek Sedlacek, Zdenek Chval
 
Machine Modeling and Simulations 2017 Design of pallet, frame and chain of soldering station conveyor Abstract
Mária Blatnická, Milan Sága, Miroslav Blatnický
 
Machine Modeling and Simulations 2017 Design of stirling engine operating at low temperature difference Abstract
Josef Sedlák, Adam Glváč, Andrej Czán
 
Machine Modeling and Simulations 2019 Design problems of axisymmetric connections in the aspect of machine engineering drawings Abstract
Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2018 Detection of composite damage by IR NDT using ultrasonic excitation Abstract
Vladimir Dekys, Ondrej Stalmach, Josef Soukup, Alzbeta Sapietova, Lenka Rychlikova
 
Machine Modeling and Simulations 2019 Determination of engine oil characteristics Abstract
Katarína Moricová, Iveta Papučova, Silvia Ďurišová, Robert Janík
 
Machine Modeling and Simulations 2017 Determination of the influence of adherent surface on the adhesive bond strength Abstract
Tomas Kalina, Frantisek Sedlacek, Jan Krystek
 
Machine Modeling and Simulations 2018 Determination of the laminate strains using discrete damage mechanics Abstract
Milan Žmindák, Pavol Novák, Leszek Radziszewski, Josef Soukup, Michal Kaco
 
Machine Modeling and Simulations 2019 Determination of the strength of a flat wagon by elastic viscous interaction with tank containers Abstract
Oleksij Fomin, Juraj Gerlici, Alyona Lovska, Tomas Lack, Natalia Bykovets, Halyna Shatkovska, Kateryna Kravchenko
 
Machine Modeling and Simulations 2019 Determination of the vibration emission level for a chipper with combustion engine Abstract
Michał Kończak, Mateusz Kukla, Łukasz Warguła, K Talaska
 
Machine Modeling and Simulations 2017 Determination the maximum load capacity of the welded structure of the transport carriage in operation Abstract
Vladislav Baniari, Marián Handrik, Milan Vaško, Ján Kortiš, Ľuboš Daniel
 
Machine Modeling and Simulations 2019 Development and design of new mechanical forging presses Abstract
Martin Zahalka, K Raz
 
Machine Modeling and Simulations 2017 Development of methods for performing the maximum voluntary contraction (MVC) test Abstract
Mateusz Kukla, Bartosz Wieczorek, Łukasz Warguła
 
Machine Modeling and Simulations 2017 Diagnosis of machine tool with using Renishaw ballbar system Abstract
Robert Čep, Šárka Malotová, Jiří Kratochvíl, Dana Stančeková, Andrej Czán, Tomáš Jakab
 
Machine Modeling and Simulations 2019 Digital filtration methods in selected industrial applications Abstract
Pawel Dobrzanski, Magdalena Dobrzanska
 
Machine Modeling and Simulations 2018 Digital possibilities of reconstruction of machine parts Abstract
Piotr Paszta
 
Machine Modeling and Simulations 2017 Discrete element method approach to modelling VPP dampers Abstract
Paweł Chodkiewicz, Jakub Lengiewicz, Robert Zalewski
 
Machine Modeling and Simulations 2018 DISSEMINATION OF SHOCK WAVES IN THIN PLATES - COMPARISON OF ELASTIC PLATE - KIRCHHOFF AND RAYLEIGH MODELS Abstract
František Klimenda, Josef Soukup, MIlan Žmindák, Blanka Skočilasová
 
Machine Modeling and Simulations 2019 Dynamic analysis of an freight railway wagon for safe rides along an S-shaped curve Abstract
Pavol Šťastniak, Marián Moravčík
 
Machine Modeling and Simulations 2019 Dynamic modelling of elastic plates reinforced by strong fibres Abstract
Dragan Milosavljevic, Alzbeta Sapietova, Milan Zmindak, Vladimir Dekys, Pavol Novak
 
Machine Modeling and Simulations 2019 Dynamic properties of pneumatic transport in a oilseed grinder Abstract
Grzegorz Śmigielski, Krzysztof Tyszczuk, Adam Mroziński, Kazimierz Peszyński
 
Machine Modeling and Simulations 2018 Dynamic simulation of a virtual prototype of a one-track vehicle in motion on uneven ground conditions Abstract
Krzysztof Łukaszewicz, Norbert Niechoćko
 
Machine Modeling and Simulations 2018 Dynamics of the mobile platform with four wheel drive Abstract
Anna Agata Jaskot, Bogdan Posiadała
 
Machine Modeling and Simulations 2019 Effect of alternative filler from glass industry on the selected properties of friction polymer matrix in automotive industry Abstract
Juliána Vršková, Darina Ondrušová, Ivan Labaj, Ivan Kopal
 
Machine Modeling and Simulations 2017 Effect of bentonite modified by silane on rubber blends properties Abstract
Zuzana Mičicová, Slavomíra Božeková, Mariana Pajtášová, Darina Ondrušová
 
Machine Modeling and Simulations 2019 Effect of deformation parameters on microstructure evolution and properties of 33NiCrMoV15 steel Abstract
Igor Barényi, Michal Krbaťa, Jozef Majerík, Ivana Mikušová
 
Machine Modeling and Simulations 2017 Effect of the pressed ceramic filters on the reoxidation processes Abstract
Marek Brůna, Dana Bolibruchová, Richard Pastirčák
 
Machine Modeling and Simulations 2018 Effect of wave propagation and transfer of a sensor on detected acoustic emission signal Abstract
Marek Raček
 
Machine Modeling and Simulations 2019 Elastomer modification by means of ionizing radiation Abstract
Valeryia Bobrova, Andrei Kasperovich, A Mozyrev, Jan Krmela, Vladimíra Krmelová
 
Machine Modeling and Simulations 2017 Electromagnetic angular positioner based on DC micromotor Abstract
Maciej Bodnicki, Jakub Wierciak, Wojciech Credo, Karol Bagiński, Leszek Wawrzyniuk
 
Machine Modeling and Simulations 2018 Empirical determination of the mechanical properties of Vacuum Packed Particles Abstract
Piotr Bartkowski, Robert Zalewski
 
Machine Modeling and Simulations 2019 Energy optimal trajectories for electro-mechanical systems Abstract
Pavol Oršanský, Branislav Ftorek, Ján Vittek
 
Machine Modeling and Simulations 2017 Engineering calculations for complex geometric domains Abstract
Elżbieta Gawrońska, Robert Dyja, Andrzej Grosser, Jerzy Winczek
 
Machine Modeling and Simulations 2017 Euler-Lagrange optimization of electric drives with DTM method Abstract
Pavol Oršanský, Branislav Ftorek, Helena Šamajová, Ján Vittek
 
Machine Modeling and Simulations 2019 Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part I: Modeling Abstract
Andrzej Mitura, Rafal Rusinek
 
Machine Modeling and Simulations 2019 Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part II: Numerical results Abstract
Andrzej Mitura, Rafal Rusinek
 
Machine Modeling and Simulations 2018 Evaluation of passenger riding comfort of a rail vehicle by means dynamic simulations Abstract
Andrej Suchánek, Mária Loulová, Jozef Harušinec
 
Machine Modeling and Simulations 2018 Evaluation of the mechanical properties of photopolymers used in Polymer Jetting technology Abstract
Czesław Kundera, Jerzy Bochnia, Tomasz Kozior
 
Machine Modeling and Simulations 2018 Evaluation of the possibility of using the Drucker-Prager-Cap model in simulations of the densification process of shredded natural materials Abstract
Maciej Berdychowski, Krzysztof Talaśka, Dominik Wilczyński
 
Machine Modeling and Simulations 2019 Evaluation of the protective PE foils properties after exposure in various environments Abstract
Dušan Gaňa, Lenka Markovičová, Tatiana Liptáková
 
Machine Modeling and Simulations 2017 Evaluation of the technical condition of medium-sized boilers Abstract
Pavel Lošák, Tomáš Létal, Jiří Buzík, Martin Naď
 
Machine Modeling and Simulations 2019 Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics Abstract
Jela Legerská, Darina Ondrušová, Jan Krmela
 
Machine Modeling and Simulations 2017 Examples of modern methods of measuring deformations. Abstract
Tomasz Domański
 
Machine Modeling and Simulations 2017 Experimental and computational comparative study of the specimens loaded by bending and torsion Abstract
Lenka Jakubovičová, Milan Vaško, Milan Sága, Peter Kopas
 
Machine Modeling and Simulations 2019 Experimental and numerical tests of clinch connections strength Abstract
Marian Dudziak, Krzysztof Talaśka, Dominik Wilczyński
 
Machine Modeling and Simulations 2018 Experimental and numerical tests of the compaction process of loose material in the form of sawdust Abstract
Dominik Wilczyński, Dominik Wojtkowiak, Maciej Berdychowski, Jan Górecki, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2017 Experimental casting of forging ingots from model material Abstract
Ján Moravec, Peter Kopas, Lenka Jakubovičová, Bohuš Leitner
 
Machine Modeling and Simulations 2019 EXPERIMENTAL DETERMINATION OF CONTINUOUS COOLING TRANSFORMATION DIAGRAM FOR HIGH STRENGTH STEEL OCHN3MFA Abstract
Michal Krbaťa, Jozef Majerík, Igor Barényi, Maroš Eckert
 
Machine Modeling and Simulations 2018 Experimental determination of electromagnetic brake parameters of the positioning system Abstract
Piotr Perz, Dominik Wilczyński, Ireneusz Malujda
 
Machine Modeling and Simulations 2017 Experimental investigation of properties of GFRP foam cored sandwich joints Abstract
Jana Gulanová, Matúš Margetin, Papa Birame Gning, Andrej Chribik
 
Machine Modeling and Simulations 2019 Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer Abstract
Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki
 
Machine Modeling and Simulations 2019 Experimental research of the thermoplastic belt plasticizing process in the hot plate welding Abstract
Krzysztof Wałęsa, Ireneusz Malujda, Dominik Wilczyński
 
Machine Modeling and Simulations 2017 Experimental research of vehicle traction properties for reconstruction of traffic accidents Abstract
Marian Dudziak, Andrzej Lewandowski, Michał Śledziński
 
Machine Modeling and Simulations 2017 Experimental research on biomass cutting process Abstract
Dominik Wilczyński, Krzysztof Talaśka, Ireneusz Malujda, Piotr Jankowiak
 
Machine Modeling and Simulations 2018 Experimental research on the process of cutting transport belts Abstract
Dominik Wilczyński, Ireneusz Malujda, Jan Górecki, Grzegorz Domek
 
Machine Modeling and Simulations 2017 Experimental testing of pla biodegradable thermoplastic in the frame of 3d printing fdm technology Abstract
Juraj Beniak, Peter Križan, Miloš Matúš, Michal Šajgalík
 
Machine Modeling and Simulations 2018 Experimental tests of vehicle body acceleration at selected railway crossing Abstract
Konrad Jan Waluś, Jakub Polasik, Janusz Mielniczuk, Łukasz Warguła
 
Machine Modeling and Simulations 2021 Experimental verification of high-strength composite materials using a simulation program Abstract
Lucia Knapčíková, Jakub Kaščak, Jozef Husár
 
Machine Modeling and Simulations 2018 Fatigue characteristics of welded high strength steel in the low cycle region of loading Abstract
Peter Kopas, Milan Sága, Marián Handrik, Milan Vaško, Lenka Jakubovičová
 
Machine Modeling and Simulations 2017 Fatigue life prediction of mechanical structures under stochastic loading Abstract
Bohus Leitner, Lucia Figuli
 
Machine Modeling and Simulations 2017 Fatigue limit estimation using IR camera Abstract
Zuzana Stankovičová, Vladimír Dekýš, Milan Uhríčik, Pavol Novák, Bohumír Strnadel
 
Machine Modeling and Simulations 2019 FE modeling of continuous fiber reinforced thermoplastic composite structures produced by additive manufacturing Abstract
Jaroslav Majko, Milan Sága, Milan Vaško, Marián Handrik, Zuzana Ságová
 
Machine Modeling and Simulations 2019 FEM ANALYSIS OF SELECTED CONSTRUCTION BODIES OF THE CONCEPTUAL BIKE Abstract
Karol Grzegorz Konecki, Krzysztof Talaśka, Andrzej Kołodziej
 
Machine modeling and simulations 2020 Finite Element Analysis of the single shear piercing punch performance for belt perforation Abstract
Dominik Wojtkowiak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2017 Finite element simulation of laser cutting process of stell sheet Abstract
Jozef Meško, Andrej Zrak, Rastislav Nigrovič, Milan Žmindák
 
Machine Modeling and Simulations 2019 FINITE ELEMENT SIMULATION OF TENSILE TEST OF COMPOSITE MATERIALS MANUFACtURED BY 3D PRINTING Abstract
Milan Zmindak, Pavol Novak, Josef Soukup, Dragan Milosavljevic, Michal Kaco
 
Machine Modeling and Simulations 2017 Flap casting of turbine engine optimalization by numerical simulation Abstract
Marek Brůna, Anna Remišová
 
Machine Modeling and Simulations 2018 Flexible grippers for industrial robots – comparison of features of low-cost 3D printed component Abstract
Piotr Zbroja, Ksawery Szykiedans, Wojciech Credo
 
Machine Modeling and Simulations 2017 Forced convection and heat transfer around a bounded cylinder Abstract
Blanka Skočilasová, Jan Skočilas, Josef Soukup
 
Machine Modeling and Simulations 2017 Free vibration analysis of a DST-0285 truck crane considering changes in the system load configuration Abstract
Tomasz Geisler
 
Machine Modeling and Simulations 2018 Functional and construction indicator for the briquetting process of lignocellulosic materials Abstract
Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, Mateusz Kukla, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2019 Generating the cloud of points from the phase images Abstract
Ondrej Štalmach, K Štalmachová, F Bárnik, J Pobijak
 
Machine Modeling and Simulations 2019 Glass surface modification using diffusion coplanar surface barrier discharge (DCSBD) Abstract
Jana Šulcová, Iveta Papučová, Róbert Janík
 
Machine Modeling and Simulations 2018 Globoid surface shaped with turning and envelope method Abstract
Rafał Gołębski, Piotr Boral
 
Machine Modeling and Simulations 2019 Granulation Machines with Highly Turbulized Flows: Creation of Software Complex for Technological Design Abstract
Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová
 
Machine Modeling and Simulations 2017 Heat conduction in a composite sphere - the effect of fractional derivative order on temperature distribution Abstract
Urszula Siedlecka, Stanisław Kukla
 
Machine Modeling and Simulations 2017 Heat flow and heat transfer coefficient during crystallization under the pressure Abstract
Richard Pastirčák, Ján Ščury, Tomáš Fecura
 
Machine Modeling and Simulations 2019 Identification of mechanical properties of KORDCARBON-CPREG-200-T-3K-EP1-42-A composite Abstract
Jan Krystek, M Zajíček, R Kottner
 
Machine Modeling and Simulations 2019 Identification, prediction and control of residual stress regulation in surface layers after chip machining Abstract
Andrej Czán, Jozef Holubjak, Ondrej Kubala, Tatiana Czanova, Stanislav Krajcoviech, Richard Joch
 
Machine Modeling and Simulations 2017 Identifying the cause of cutting tool failure by using simulation software Abstract
Andrej Zrak, Radoslav Koňár
 
Machine Modeling and Simulations 2019 Imaging and computer analysis in the shape error measurements and in the cylindrical objects stereometry Abstract
Andrzej Zaborski, Jerzy Winczek
 
Machine Modeling and Simulations 2018 Improvement of the bearing structure of the wagon-platform of the articulated type to ensure the reliability of the fixing on the deck of the railway ferry Abstract
Oleksij Fomin, Juraj Gerlici, Alyona Lovskaya, Kateryna Kravchenko, Pavlo Prokopenko, Tomas Lack
 
Machine Modeling and Simulations 2017 Improving the quality of cutting flat glass Abstract
Martin Svoboda, Josef Soukup, Milan Sapieta
 
Machine Modeling and Simulations 2017 Inelastic damage using continuum damage mechanics in composite plate reinforced by unidirectional fibers Abstract
Milan Žmindák, Martin Dudinský
 
Machine Modeling and Simulations 2019 Influence of CNC milling strategies on complex surfaces machining Abstract
Tomáš Dodok, Nadežda Čuboňová, Miroslav Císar, Vitalii Ivanov, Dorota Wiecek
 
Machine Modeling and Simulations 2017 Influence of geometrical parameters of convergent sleeve on the value of limit stress Abstract
Jan Górecki, Ireneusz Malujda, Krzysztof Talaśka, Dominik Wilczyński, Dominik Wojtkowiak
 
Machine Modeling and Simulations 2018 Influence of geometrical parameters of the forming channels in a multichannel die on the limit value of limit force in the process of dry ice agglomeration Abstract
Jan Górecki, Ireneusz Malujda, Dominik Wilczyński
 
Machine Modeling and Simulations 2017 Influence of microscopic casting defects on fatigue endurance of ductile cast iron Abstract
František Nový, Peter Kopas, Otakar Bokůvka, Michal Jambor, Libor Trško
 
Machine Modeling and Simulations 2019 Influence of mounting on hanging bolt lifetime Abstract
Andrej Dubec, Petra Kováčiková, Mariana Janeková
 
Machine Modeling and Simulations 2017 Influence of structure sensitising of the AISI 316Ti austenitic stainless steel on the ultra-high cycle fatigue properties Abstract
Michal Jambor, František Nový, Otakar Bokůvka, Libor Trško, Monika Oravcová
 
Machine Modeling and Simulations 2018 Influence of the shape of the piston pressure face on the limit value of compaction stress in the process of dry ice agglomeration Abstract
Jan Górecki, Ireneusz Malujda, Dominik Wojtkowiak, Dominik Wilczyński
 
Machine Modeling and Simulations 2019 Information and analytical system to monitor operating processes and environmental performance of vehicle propulsion systems Abstract
Vasyl Mateichyk, Milan Saga, Miroslaw Smieszek, Mykola Tsiuman, Nataliia Goridko, Igor Gritsuk, Roman Symonenko
 
Machine Modeling and Simulations 2019 Innovative design of parking brake testing equipment in the laboratory conditions Abstract
Pavol Kurčík, Pavol Šťastniak, Jozef Harušinec
 
Machine Modeling and Simulations 2019 Innovative design solution for a blockade immobilizing long-barrel Mauser-type and related firearms Abstract
Ireneusz Teodor Dziubek, Andrzej Kołodziej, Krzysztof Talaśka
 
Machine Modeling and Simulations 2018 Innovative research method of the fuel injector that allows to evaluate the efficiency of wood chip drive control systems Abstract
Łukasz Warguła, Piotr Krawiec, Konrad Waluś
 
Machine Modeling and Simulations 2017 Innovative wheel tread design aimed to tramcar-track interaction improvement when passing curves of a small radius Abstract
Vladimír Hauser, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, Tomáš Lack
 
Machine Modeling and Simulations 2018 INTRODUCTION OF ENVIRONMENTAL ASPECTS IN DESIGNING OF MACHINES Abstract
Zbigniew Kłos
 
Machine Modeling and Simulations 2017 Investigation of kinematic parameters of two nonconventional piston machines with wobble board Abstract
Peter Baran, Pavol Šťastniak, Pavol Kukuča, Miloš Brezáni
 
Machine Modeling and Simulations 2018 Investigation of railway wheelset profile wear by using computer tools Abstract
Lukáš Smetanka, Pavol Šťastniak, Slavomír Hrček
 
Machine Modeling and Simulations 2018 Investigation of strength conditions of the new wagon prototype type Zans Abstract
Pavol Šťastniak, Marián Moravčík, Lukáš Smetanka
 
Machine Modeling and Simulations 2017 Investigation of the effects of the equivalent circuit parameters on induction motor torque using three different equivalent circuit models Abstract
Mehmet Murat Tezcan, Asim Gokhan Yetgin, Ali İhsan Çanakoğlu, Barış Cevher, Mustafa Turan, Murat Ayaz
 
Machine Modeling and Simulations 2018 Investigation of the impact of geometry of the riser on the location and shape of shrinkage cavity Abstract
Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak, Leszek Sowa
 
Machine Modeling and Simulations 2018 Investigation of vertical vibrations of solid plate space springy stored – vehicle model Abstract
Josef Soukup, František Klimenda, Marian Handrik, Blanka Skočilasová, Jan Skočilas
 
Machine Modeling and Simulations 2019 Kinematic Analysis and Distribution of Stress for Five-Item Mechanism by Means of the SolidWorks Program Abstract
Ján Vavro, Ján Vavro, jr.
 
Machine Modeling and Simulations 2018 KINEMATIC ANALYSIS OF STIRLING ENGINE Abstract
Ján Vavro, jr., Ján Vavro
 
Machine Modeling and Simulations 2017 Kinematic and dynamic analysis and distribution of stress for four-item mechanism Abstract
Ján Vavro jr., Ján Vavro, Petra Kováčiková, Juliána Vršková
 
Machine Modeling and Simulations 2017 Kinematic and dynamic analysis and distribution of stress for six-item mechanism Abstract
Ján Vavro jr., Ján Vavro, Petra Kováčiková, Juliána Vršková
 
Machine Modeling and Simulations 2019 Kinematic and Dynamic Analysis and Distribution of Stress for Six-Item Mechanism by Means of the SolidWorks Program Abstract
Ján Vavro, Ján Vavro
 
Machine Modeling and Simulations 2017 Lap weld joint modelling and simulation of welding in programme SYSWELD Abstract
Radoslav Koňár, Miloš Mičian, Andrej Zrak
 
Machine Modeling and Simulations 2018 Life analysis of the bolted join Abstract
Milan Sapieta, Peter Sulka
 
Machine Modeling and Simulations 2017 Load of the slipper-swash plate kinematic pair of an axial piston pump Abstract
Tadeusz Andrzej Złoto, Konrad Dominik Kowalski
 
Machine Modeling and Simulations 2019 Localization of damage in composite test specimens. Abstract
Milan Sapieta
 
Machine Modeling and Simulations 2017 Localization of delamination in composite test specimens.​ Abstract
Milan Sapieta, Peter Šulka, Martin Svoboda
 
Machine Modeling and Simulations 2019 Low cycle fatigue of weldable high strength steels WELDOX 960 Abstract
Peter Kopas, František Nový, Marián Handrik, Milan Vaško, Lenka Jakubovičová
 
Machine Modeling and Simulations 2017 Low-cycle fatigue behaviour of laser welded high-strength steel DOMEX 700 MC Abstract
Peter Kopas, Milan Sága, František Nový, Bohuš Leitner
 
Machine Modeling and Simulations 2017 Material property determination of the lining layers of a versatile helmet Abstract
Radek Kottner, Richard Hynek, Tomáš Mandys, Jan Bartošek
 
Machine Modeling and Simulations 2019 MATHEMATICAL MODEL OF THE VEHICLE INITIAL RECTILINEAR MOTION DURING MOVING UPHILL Abstract
Mykola Bulgakov, Serhii Shuklynov, Anatolii Uzhva, Dmytro Leontiev, Viktor Verbitskiy, Maksym Amelin, Olena Volska
 
Machine Modeling and Simulations 2018 Measurement and analysis of parameters of the precise grinding system Abstract
Krzysztof Tyszczuk
 
Machine Modeling and Simulations 2019 Measurement and comparison study of deformation using extensometer and 2D DIC technology Abstract
František Bárnik, Milan Sága, Milan Vaško, Marián Handrik, Peter Kopas, Ondrej Štalmach, Filip Dorčiak
 
Machine Modeling and Simulations 2017 Measurement system for special surface mapping using miniature displacement sensors Abstract
Martyna Zowade, Maciej Bodnicki
 
Machine Modeling and Simulations 2018 Mechanical properties of structures produced by 3D printing from composite materials Abstract
František Bárnik, Milan Sága, Milan Vaško, Marian Handrik, Alžbeta Sapietová
 
Machine Modeling and Simulations 2017 Method of controlling innovative articulation for articulated vehicle Abstract
Mateusz Szumilas, Sergiusz Łuczak, Maciej Bodnicki, Marcin Stożek, Tomasz Załuski
 
Machine Modeling and Simulations 2019 Methods for measuring the position of the centre of gravity of an anthropotechnic human-wheelchair system in dynamic conditions Abstract
Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła
 
Machine Modeling and Simulations 2017 Missing values reconstruction in sound level monitoring station by means of intelligent computing Abstract
Leszek Radziszewski, Michał Kekez, Alžbeta Sapietová
 
Machine Modeling and Simulations 2017 Model calculations of posterior reliability indicators for the proposal of the maintenance system Abstract
Jana Galliková, Vladimír Stuchlý, Roman Poprocký, Peter Volna
 
Machine Modeling and Simulations 2019 Model of electricity consumption in a manufacturing company – time series decomposition Abstract
Mária Michalková, Peter Ďurčanský
 
Machine Modeling and Simulations 2017 Modeling and strength analysis of the prototype of the multi-tasking car trailer Abstract
Bogdan Posiadala, Piotr Ladra
 
Machine Modeling and Simulations 2018 Modeling of acoustic pressure variability at thoroughfare Abstract
Leszek Radziszewski, Michał Kekez, Andrzej Bąkowski, Alžbeta Sapietová
 
Machine Modeling and Simulations 2018 Modeling of heat flow using commercial and authorial software on the example of a permanent magnet motor Abstract
Elżbieta Gawrońska, Robert Dyja, Bartłomiej Będkowski, Łukasz Cyganik
 
Machine Modeling and Simulations 2019 Modeling of selected mechanical properties of magnetorheological elastomers Abstract
Mateusz Kukla
 
Machine Modeling and Simulations 2018 Modelling and Simulation of Mechatronic Systems in Matlab / Simulink Abstract
Vladimír Bulej, Juraj Uríček, Manfred Eberth, Ján Stanček
 
Machine Modeling and Simulations 2018 Modelling and static stability analyses of the hexa-quad bimorph walking robot Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda, Jan Górecki, Dominik Wilczyński
 
Machine Modeling and Simulations 2017 Modelling mechanical properties of the multilayer composite materials with the polyamide core Abstract
Krzysztof Talaśka, Dominik Wojtkowiak
 
Machine Modeling and Simulations 2018 Modelling of the pitch of the tooth belt Abstract
Grzegorz Jan Domek, Michał Wilczyński
 
Machine Modeling and Simulations 2017 Modelling of the road traffic noise Abstract
Andrzej Bakowski, Leszek Radziszewski, Vladimír Dekýš
 
Machine Modeling and Simulations 2019 Modelling of wear out of timing belt’s pulley Abstract
Grzegorz Jan Domek, Andrzej Kołodziej, Michał Wilczyński
 
Machine Modeling and Simulations 2017 Modification of alternative additives and their effect on the rubber properties Abstract
Darina Ondrušová, Slavomíra Božeková, Lenka Buňová, Mariana Pajtášová, Ivan Labaj, Andrej Dubec, Juliána Vršková
 
Machine Modeling and Simulations 2018 Modification of the optimalization model for simulation of large-diameter pipes bending Abstract
Marián Handrik, Filip Dorčiak, Milan Sága, Milan Vaško, Lenka Jakubovičová
 
Machine Modeling and Simulations 2017 Monitoring the fatigue crack on the test specimen during the cyclic loading. Abstract
Milan Sapieta, Peter Šulka, Martin Svoboda
 
Machine Modeling and Simulations 2018 Monte Carlo comparison of estimation methods for the two-parameter lognormal distribution Abstract
Ivana Pobočíková, Zuzana Sedliačková, Mária Michalková, Lenka Kuchariková
 
Machine Modeling and Simulations 2019 Multifactor analysis of experiment parameters on the example of the biomass cutting process Abstract
Dominik Wilczyński
 
Machine Modeling and Simulations 2018 New model of lumbar spine biomechanics with the use of simulation analysis Abstract
Łukasz Kubaszewski, Mikołaj Dąbrowski, Krzysztof Talaśka, Dominik Wilczyński
 
Machine Modeling and Simulations 2017 Noise and temperature reduction in the contact of tribological elements during braking Abstract
Juraj Gerlici, Mykola Gorbunov, Kateryna Kravchenko, Olga Prosvirova, Tomas Lack
 
Machine Modeling and Simulations 2017 Novel algorithm for tilt measurements using MEMS accelerometers Abstract
Sergiusz Łuczak
 
Machine Modeling and Simulations 2017 Numerical analysis of laser welding with consideration of analytical methods of determination of phase transformations and mechanical properties of welded joints Abstract
Wiesława Piekarska, Dorota Goszczyńska-Króliszewska, Zbigniew Saternus, Tomasz Domański, Marcin Kubiak
 
Machine Modeling and Simulations 2017 Numerical analysis of stiffener for hybrid drive unite Abstract
Lenka Jakubovičová, Milan Sága, Marián Handrik
 
Machine Modeling and Simulations 2019 Numerical analysis of thermal phenomena during surface heat treatment of AlZn5.5MgCu aluminum alloy by GTA welding method Abstract
Jerzy Winczek, J Iwaszko, M Matuszewski
 
Machine Modeling and Simulations 2019 Numerical analysis of thin-walled component structure Abstract
Radosław Pytliński, Dominik Wojtkowiak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2019 Numerical and experimental analysis of a laser welded joint made of dissimilar materials S355 and 304 steel Abstract
Zbigniew Saternus, Wiesława Piekarska, Milan Sapieta, Peter Kopas
 
Machine Modeling and Simulations 2017 Numerical computation of the damping and stiffness coefficients of the classical and of the magnetorheological squeeze film damper Abstract
Petr Ferfecki, Jaroslav Zapoměl, Michal Šofer, František Pochylý, Simona Fialová
 
Machine Modeling and Simulations 2019 Numerical estimation of heat affected zone in spirally laser quenched shaft Abstract
Tomasz Domański, Milan Sága, Marcin Kubiak, Zbigniew Saternus, Pavol Novák
 
Machine Modeling and Simulations 2017 Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials Abstract
Zbigniew Saternus, Wiesława Piekarska, Marcin Kubiak, Tomasz Domański, Dorota Goszczyńska-Króliszewska
 
Machine Modeling and Simulations 2017 Numerical modal analysis for vibration-damping properties of ductile cast Abstract
Petra Kováčiková, Ján Vavro, Ján Vavro jr., Andrej Dubec
 
Machine Modeling and Simulations 2018 Numerical model of solidification process of Fe-C alloy taking into account the phenomenon of shrinkage cavity formation Abstract
Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak, Leszek Sowa
 
Machine Modeling and Simulations 2018 Numerical modeling of cutting process of steel sheets using a laser beam Abstract
Zbigniew Saternus, Wiesława Piekarska, Marcin Kubiak, Tomasz Domański, Dorota Goszczyńska-Króliszewska
 
Machine Modeling and Simulations 2017 Numerical modeling of heat flow between three-dimensional regions in contact problems Abstract
Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak
 
Machine Modeling and Simulations 2017 Numerical modeling of heat flows in the upper blast furnace of the electric arc furnace Abstract
Richard Lenhard, Milan Malcho, Peter Ďurčanský, Katarína Kaduchová
 
Machine Modeling and Simulations 2017 Numerical modeling of the contact between three-dimensional regions with the use of FEM Abstract
Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak, Leszek Sowa
 
Machine Modeling and Simulations 2017 Numerical modelling of caustics of solid state disk lasers Abstract
Marcin Kubiak
 
Machine Modeling and Simulations 2017 Numerical modelling of sandwich panels with a non-continuous soft core Abstract
Jolanta Pozorska
 
Machine Modeling and Simulations 2017 Numerical modelling of the rigid polyurethane foam microstructure Abstract
Zbigniew Pozorski
 
Machine Modeling and Simulations 2017 Numerical research of biomechanical system with SMA prosthesis Abstract
Andrzej Mitura, Rafal Rusinek
 
Machine Modeling and Simulations 2017 Numerical simulation of blanking process Abstract
Peter Pecháč, Milan Sága
 
Machine Modeling and Simulations 2017 Numerical simulations of progressive hardening by using ABAQUS FEA software. Abstract
Tomasz Domański, Wiesława Piekarska, Marcin Kubiak, Zbigniew Saternus, Dorota Goszczyńska-Króliszewska
 
Machine Modeling and Simulations 2017 Numerical solution of Rayleigh-Lamb frequency equation for real, imaginary and complex wavenumbers Abstract
Michal Šofer, Petr Ferfecki, Pavel Šofer
 
Machine Modeling and Simulations 2019 Numerical Study Of Linearization Techniques For Bouc-Wen Hysteresis Model Considering Random Inputs Abstract
Milan Sága, Milan Vaško, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly Muraviev, Olga Muravieva
 
Machine Modeling and Simulations 2018 Numerical study of the relation between chosen statistical parameters of input stresses and cumulative fatigue damage provided rainflow decomposition Abstract
Milan Sága, Ondrej Štalmach, Mária Blatnická, Marian Handrik, Zuzana Ságová
 
Machine Modeling and Simulations 2019 On one method how to find optimal parameters for some technical problems Abstract
Ladislav Matejíčka
 
Machine Modeling and Simulations 2017 Optical atributes influence on mechanical properties of laser cutted PMMA Abstract
Jozef Meško, Rastislav Nigrovič
 
Machine Modeling and Simulations 2017 Parallelization of computational algorithms for optimization problems with high time consumption Abstract
Milan Vaško, Marián Handrik, Alžbeta Sapietová, Jana Handriková
 
Machine Modeling and Simulations 2018 Parametric oscilator with perturbation and its analytical solution Abstract
Pavol Oršanský
 
Machine Modeling and Simulations 2017 Parametric oscillations of the mechanical systems Abstract
Branislav Ftorek, Pavol Oršanský, Helena Šamajová
 
Machine Modeling and Simulations 2017 Passive safety system for small unmanned aerial vehicles Abstract
Piotr Bartkowski, Robert Zalewski
 
Machine Modeling and Simulations 2018 Peculiarities of the mathematical modelling of dynamic loading on containers in flat wagons transportation Abstract
Oleksij Fomin, Juraj Gerlici, Alyona Lovskaya, Kateryna Kravchenko, Oleksii Burlutski, Vladimír Hauser
 
Machine Modeling and Simulations 2017 Polyurethane foam behaviour during impact Abstract
Stanislav Špirk, Michal Křížek, Štěpán Jeníček
 
Machine Modeling and Simulations 2017 Porosity formation and fatigue properties of AlSiCu cast alloy Abstract
Lenka Kuchariková, Eva Tillová, Milan Uhríčik, Juraj Belan
 
Machine Modeling and Simulations 2019 Possibilities of modelling the bolts in program ANSYS Abstract
Jozef Bocko, Pavol Lengvarský, Róbert Huňady
 
Machine Modeling and Simulations 2019 Pre-clinical testing of different implant structures in animal subjects Abstract
Lukáš Mitrík, Marianna Trebuňová, Radovan Hudák, Marek Schnitzer, Jozef Živčák
 
Machine Modeling and Simulations 2018 Prediction of microstructure composition in steel plate heated using high power Yb:YAG laser radiation Abstract
Marcin Kubiak
 
Machine Modeling and Simulations 2017 Prediction of modal properties of circular disc with pre-stressed fields Abstract
Milan Naď, Rastislav Ďuriš, Tibor Nánási
 
Machine Modeling and Simulations 2019 Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters. Abstract
Jan Górecki
 
Machine Modeling and Simulations 2019 Preliminary research of strength of glued connections of plastic elements Abstract
Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Konrad Walesa
 
Machine Modeling and Simulations 2018 Preliminary research of the thermomechanical properties of the round drive belts Abstract
Krzysztof Wałęsa, Olga Mysiukiewicz, Michał Pietrzak, Jan Górecki, Dominik Wilczyński
 
Machine Modeling and Simulations 2018 Preparation and properties of new elastomeric systems containing alternative fillers Abstract
Darina Ondrušová, Ivan Labaj, Mariana Pajtášová, Juliana Vršková
 
Machine Modeling and Simulations 2017 Probability analysis of dynamical effects of axial piston hydraulic motor Abstract
Alžbeta Sapietová, Vladimír Dekýš, Milan Sapieta, Peter Šulka, Lukas Gajdos, Isabela Rojek
 
Machine Modeling and Simulations 2018 Problems of dynamometer construction for wheelchairs and simulation of push motion Abstract
Bartosz Wieczorek, Łukasz Warguła
 
Machine Modeling and Simulations 2018 Profiles synthesis through radii variation of arcs profile method Abstract
Tomáš Lack, Juraj Gerlici
 
Machine Modeling and Simulations 2018 Prototype of a controllable damper based on granular materials subjected to partial vacuum Abstract
Robert Zalewski, Piotr Bartkowski
 
Machine Modeling and Simulations 2019 Reduction of the value of the bend deflection arising due to external forces and gravity by applying the tensile stress to the axial alignment. Abstract
Paweł Knast
 
Machine Modeling and Simulations 2019 Research and application of PLA fibre Abstract
Michal Kleščík, Bibiana Bizubová, Tomáš Zatroch, Alena Balogová, Luis Alberto Rivera Pedraza, Petra Skalková, Vladimíra Krmelová, Jan Krmela, Erna Muks, Lien Van Der Schueren
 
Machine Modeling and Simulations 2019 Research of vehicle control informative functioning capacity Abstract
Ivan Kuric, Oleksandr Gorobchenko, Oleksandra Litikova, Igor Gritsuk, Vasyl Mateichyk, Mykola Bulgakov, Ivana Klackova
 
Machine Modeling and Simulations 2019 Research on the compaction process of loose materials with use of helix technology Abstract
Maciej Berdychowski, Dominik Wilczyński, Krzysztof Wałęsa, Jan Górecki
 
Machine Modeling and Simulations 2018 Research on the process of biomass compaction in the form of straw Abstract
Dominik Wilczyński, Ireneusz Malujda, Jan Górecki, Piotr Jankowiak
 
Machine Modeling and Simulations 2018 Road train motion stability in BRT system Abstract
Vladimir Sakhno, Juraj Gerlici, Viktor Poliakov, Alexandr Kravchenko, Oleg Omelnitsky, Tomáš Lack
 
Machine Modeling and Simulations 2017 Selection of optimal solution heat treatment of the casting cylinder heads Abstract
Eva Tillová, Mária Chalupová, Lenka Kuchariková, Juraj Belan, Denisa Závodská
 
Machine Modeling and Simulations 2018 Self-propelled inspection vehicle on omni wheels Abstract
Jarosław Selech, Dariusz Ulbrich, Konrad Włodarczyk, Żaneta Staszak, Jacek Marcinkiewicz, Dawid Romek, Patryk Wietrzych
 
Machine Modeling and Simulations 2017 Sensitivity analysis overlaps of friction elements in cartridge seals Abstract
Milan Žmindák, Miloš Falát
 
Machine Modeling and Simulations 2019 Sensitivity study of spindle assembly used for thermal displacement reduction Abstract
Václav Marek, Z Hudec
 
Machine Modeling and Simulations 2017 Shifted axis angular positioning mechanisms – unconventional use of exact constraint design Abstract
Ksawery Szykiedans, Maciej Bujwan
 
Machine Modeling and Simulations 2018 Simlations CAE of wood pellet machine Abstract
Marek Macko, Adam Mroziński, Adam Prentki
 
Machine Modeling and Simulations 2019 Simplified approach for creep evaluation in superheaters Abstract
Martin Naď, Pavel Lošák, Tomáš Létal, Marek Pernica
 
Machine Modeling and Simulations 2019 Simulation of child passenger collision in the rail vehicle interior Abstract
Stanislav Spirk, Jan Vychytil
 
Machine Modeling and Simulations 2019 Simulation of rifled tubes drawing process Abstract
Dusan Sutak, J Zajac, M Hatala, F Botko, P Čižmár, A Bittner, P Beták
 
Machine Modeling and Simulations 2017 Simulation of solidification during crystallisation under pressure Abstract
Richard Pastirčák, Marek Brůna, Dana Bolibruchová
 
Machine Modeling and Simulations 2017 Simulation of sound transmission through the porous material, determining the parameters of acoustic absorption and sound reduction Abstract
Peter Zvolenský, Juraj Grenčík, Ľubomír Kašiar, Vladimír Stuchlý
 
Machine Modeling and Simulations 2019 Simulation of the impact bar top layer tensile test applying the Finite Elements Method Abstract
Daniela Marasová, Ľubomír Ambriško, Ľuboš Caban, Karol Semrád
 
Machine Modeling and Simulations 2019 SIMULATION OF WOOD BIOMASS COMBUSTION IN HOT WATER BOILER Abstract
Ivana Klačková, Ivan Zajačko, Richard Lenhard, Igor Gritsuk, Dariusz Wiecek
 
Machine Modeling and Simulations 2018 Simulation study of the hydraulic transmitter-receiver system Abstract
Damian Frąckowiak
 
Machine Modeling and Simulations 2017 Smart materials activation analysis on example of nickel and titanium alloys Abstract
Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła, Konrad Waluś, Klaudia Wiesner
 
Machine Modeling and Simulations 2017 Stability and vibrations control of a stepped beam using piezoelectric actuation Abstract
Krzysztof Kuliński, Jacek Przybylski
 
Machine Modeling and Simulations 2019 Static tests the stiffness of car tires Abstract
Marian Dudziak, Andrzej Lewandowski, Konrad Jan Waluś
 
Machine Modeling and Simulations 2019 Static-structural stress analysis of double row deep groove ball bearing Abstract
Peter Šulka
 
Machine Modeling and Simulations 2019 Statistical analysis of the wind speed at mountain site Chopok, Slovakia, using Weibull distribution Abstract
Ivana Pobočíková, Zuzana Sedliačková, Ján Šimon, Daniela Jurášová
 
Machine Modeling and Simulations 2017 Stimulation of nerve endings via medical device Abstract
Antonin Svoboda, Josef Soukup
 
Machine Modeling and Simulations 2018 STRENGTH REANALYSIS AND INFLUENCE LINE EQUATION OF RACK SYSTEM DRIVE FORCE Abstract
Miroslav Blatnický, Ján Dižo, Mária Blatnická
 
Machine Modeling and Simulations 2018 Stress analysis in solid-liquid parts of solidifying castings Abstract
Robert Dyja, Elzbieta Gawronska, Norbert Sczygiol
 
Machine Modeling and Simulations 2019 Stress analysis of specimen with a reinforced thin layer Abstract
Marián Handrik, Milan Vaško, J Majko, Peter Kopas, Lenka Jakubovičová, Radim Halama, Martin Fusek
 
Machine Modeling and Simulations 2017 Structural changes of selected materials for glass industry after thermal loading Abstract
Františka Pešlová, Mariana Janeková, Stanislav Krum
 
Machine Modeling and Simulations 2017 Structural design of soldering station chain conveyor working positions Abstract
Miroslav Blatnický, Ján Dižo, Mária Blatnická
 
Machine Modeling and Simulations 2019 Structure and properties of nucleated polypropylene fibres Abstract
Vladimíra Krmelová, Mária Gavendová, Tomáš Zatroch, Jan Krmela, Andrej Dubec, Bibiana Bizubová, Michal Kleščík, Alena Balogová
 
Machine Modeling and Simulations 2017 Study of clay minerals effect on curing characteristics of polymer blends and physical-mechanical properties of prepared vulcanizates Abstract
Beáta Pecušová, Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Andrea Feriancová, Marcel Kohutiar, Ivan Labaj
 
Machine Modeling and Simulations 2019 Study of microstructure of selected dental restoration parts Abstract
Daniela Koštialiková, Mariana Janeková, Andrej Dubec, Petra Kováčiková, Františka Pešlová
 
Machine Modeling and Simulations 2017 Study of new rubber to steel adhesive systems based on Co(II) and Cu(II) sulphides coats Abstract
Ivan Labaj, Darina Ondrušová, Andrej Dubec, Mariana Pajtášová, Marcel Kohutiar, Beáta Pecušová
 
Machine Modeling and Simulations 2017 Study of selected thermoplastics using dynamic mechanical analysis Abstract
Marcel Kohutiar, Mariana Pajtášová, Róbert Janík, Iveta Papučová, Jana Pagáčová, Beáta Pecušová, Ivan Labaj
 
Machine Modeling and Simulations 2019 Study of structural changes in thermoplastics using dynamic mechanical analysis Abstract
Marcel Kohutiar, Róbert Janík, Mariana Pajtášová, Darina Ondrušová, Ivan Labaj, V Zvoláneková Mezencevová
 
Machine Modeling and Simulations 2017 Study of the fatigue behaviour of synthetic nodular cast irons at low and high frequency cyclic loading Abstract
Alan Vaško, Juraj Belan, Eva Tillová
 
Machine Modeling and Simulations 2017 Study of the prototype mechanism of height adjustment of the bed in hospital bed Abstract
Ireneusz Malujda, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak, Maciej Szulc
 
Machine Modeling and Simulations 2017 Studying of cutting conditions when hard turning and their impact on integrity of shaped-complex surfaces Abstract
Jozef Holubjak, Jozef Pilc, Tatiana Czánová, Pavol Martikáň, Dušan Mitaľ, Jozef Mrázik
 
Machine Modeling and Simulations 2019 Surface properties of non-black fillers Abstract
Petra Skalková, Andrej Dubec, Jana Pagáčová, Jan Krmela, Jakub Martinec
 
Machine Modeling and Simulations 2019 Synthesis and sensitivity analysis of the crank-rocker mechanism Abstract
Alžbeta Sapietová, O Štalmach, M Sapieta
 
Machine Modeling and Simulations 2017 Temperature dependent measurement of internal damping of austenitic stainless steels Abstract
Monika Oravcová, Peter Palček, Mária Chalupová, Milan Uhríčik
 
Machine Modeling and Simulations 2017 Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning Abstract
Jan Krystek, Vladislav Laš, Vilém Pompe, Pavlína Hájková
 
Machine Modeling and Simulations 2019 Testing functional features of V-belt transmissions Abstract
Piotr Krawiec, Mariana Pajtášová, Florian Meler, Łukasz Warguła
 
Machine Modeling and Simulations 2018 Testing of a force sensor used to measure the parameters of the briquetting process of lignocellulosic materials Abstract
Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2018 Testing of a torque sensor used to measure the parameters of the briquetting process of lignocellulosic materials Abstract
Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2018 TESTS OF PROPERTIES OF SEMI-CRYSTALLINE POLYMERIC MATERIALS PRODUCED BY 3D PRINTING METHOD Abstract
Piotr Sikora
 
Machine Modeling and Simulations 2019 The application of the Finite Element Method analyses in the process of designing the punching die for belt perforation Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Aleksandra Fierek
 
Machine Modeling and Simulations 2017 The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys Abstract
Piotr Krawiec, Grzegorz Jan Domek, Łukasz Warguła, Konrad Waluś, Jarosław Adamiec
 
Machine Modeling and Simulations 2017 The assessment of the integration methods for the rail vehicle ride dynamics solution Abstract
Tomáš Lack, Juraj Gerlici
 
Machine Modeling and Simulations 2019 The Cam-Clay model in the application of technological process modeling Abstract
Maciej Berdychowski, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak
 
Machine Modeling and Simulations 2017 The characteristics analysis of torque and rotation speed of working unit of branch grinder - introductory research Abstract
Łukasz Warguła, Jarosław Adamiec, Konrad Waluś, Piotr Krawiec
 
Machine Modeling and Simulations 2018 The concept of vibration damping of the variable mass assembly Abstract
Rafał Kwiatkowski
 
Machine Modeling and Simulations 2017 The contribution to the modal analysis using an infrared camera Abstract
Vladimír Dekyš, Zuzana Stankovičová, Pavol Novák, Ondrej Štalmach
 
Machine Modeling and Simulations 2017 The damage analysis of the reinforced concrete beam and the prestressed reinforced concrete beam Abstract
Milan Vaško, Marián Handrik, Matej Rác, Vladislav Baniari, Ján Kortiš, Ľuboš Daniel
 
Machine Modeling and Simulations 2019 The design issues of rolling bearing assemblies Abstract
Krzysztof Talaśka, Dominik Wojtkowiak, Aleksandra Fierek
 
Machine Modeling and Simulations 2018 The design of the CNC milling machine Abstract
Piotr Boral
 
Machine Modeling and Simulations 2018 The determination of the value of rolling resistance coefficent of a passanger’s vehicle with the use of chosen road methods Abstract
Bartłomiej Pałasz, Konrad Jan Waluś, Łukasz Warguła
 
Machine Modeling and Simulations 2018 The determination of the value of rolling resistance coefficent of a passanger’s vehicle with the use of stationary method on a rolling road dyno Abstract
Bartłomiej Pałasz, Konrad Jan Waluś, Łukasz Warguła
 
Machine Modeling and Simulations 2018 The determination of the rolling resistance coefficient of objects equipped with the wheels and suspension system - results of pilot tests Abstract
Łukasz Warguła, Bartosz Wieczorek, Mateusz Kukla
 
Machine Modeling and Simulations 2017 The determination of the wormwheel toothing surface Abstract
Tadeusz Nieszporek, Rafał Gołębski, Piotr Boral
 
Machine Modeling and Simulations 2017 The development of diagnostics methodological principles of the railway rolling stock on the basis of the analysis of dynamic vibration processes of the rail Abstract
Juraj Gerlici, Olena Nozhenko, Ganna Cherniak, Mykola Gorbunov, Rostyslav Domin, Tomáš Lack
 
Machine Modeling and Simulations 2018 The directions of the development of the methods for designing the geometric form of the mechanical structures Abstract
Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2017 The effect of restraints type on the generated stresses in gantry crane beam Abstract
Leszek Sowa, Wiesława Piekarska, Tomasz Skrzypczak, Paweł Kwiatoń
 
Machine Modeling and Simulations 2019 The Effect of Temperature and Storage Time on Mechanical Properties of Polyamides Abstract
Dana Bakošová
 
Machine Modeling and Simulations 2017 The effect of the gantry crane beam cross section on the level of generated stresses Abstract
Leszek Sowa, Tomasz Skrzypczak, Paweł Kwiatoń
 
Machine Modeling and Simulations 2019 The effect of various alternative filler granularity on the properties of elastomeric vulcanizate Abstract
Ivan Labaj, Darina Ondrušová, Juliána Vršková, Marcel Kohutiar
 
Machine Modeling and Simulations 2017 The experimental measurement of the tyre casing defects for the freight vehicles at the dynamic loading Abstract
Ján Vavro, Ján Vavro jr., Petra Kováčiková, Jakub Híreš
 
Machine Modeling and Simulations 2019 THE FAULT TREE SIMULATION MODELING Abstract
Alexej Chovanec, Pavol Mikuš, Alena Breznická
 
Machine Modeling and Simulations 2019 THE FAULT TREE STOCHASTIC ANALYSIS Abstract
Alexej Chovanec, Alena Breznická, Pavol Mikuš
 
Machine Modeling and Simulations 2018 THE FINITE ELEMENT METHOD IN THE ANALYSIS OF THE STRESS AND STRAIN DISTRIBUTION IN POLYETHYLENE ELEMENTS OF HIP AND KNEE JOINTS ENDOPROSTHESES Abstract
Marcin Nabrdalik, Michał Sobociński
 
Machine Modeling and Simulations 2017 The fractography analysis of IN 718 alloy after three-point flexure fatigue test Abstract
Juraj Belan, Alan Vaško, Lenka Kucharikova, Eva Tillová
 
Machine Modeling and Simulations 2019 The heat treatment impact on microstucture quality of 14 260 bearing steel Abstract
Ján Vavro jr., Františka Pešlová
 
Machine Modeling and Simulations 2019 The impact of DCSBD Plasma Discharge on polypropylene Abstract
Róbert Janík, Marcel Kohutiar, Mariana Pajtášová, Andrej Dubec, Jana Pagáčová, Jana Šulcová
 
Machine Modeling and Simulations 2019 The impact of support points during the measurement of machine tool bodies on Coordinate Measuring Machines Abstract
Roman Michalski, Rafał Kwiatkowski
 
Machine Modeling and Simulations 2019 The impact of welding technology on the manufacture of metal baskets Abstract
Mariana Janeková, Daniela Koštialiková, Andrej Dubec, Petra Kováčiková, Františka Pešlová
 
Machine Modeling and Simulations 2019 The impact of wheelchairs driving support systems on the rolling resistance coefficient Abstract
Łukasz Warguła, Mateusz Kukla, Bartosz Wieczorek
 
Machine Modeling and Simulations 2019 The influence of corrosion of inorganic-organic films on their surface properties Abstract
Iveta Papučová, Jana Pagáčová, Alfonz Plško
 
Machine Modeling and Simulations 2019 The influence of corrosion of TiO2 films on their surface properties Abstract
Jana Pagáčová, Iveta Papučová, Jana Šulcová, Alfonz Plško
 
Machine Modeling and Simulations 2018 The influence of geometry of primary air channels in standard retort burners on dust emission Abstract
Bartosz Ciupek, Jarosław Bartoszewicz
 
Machine Modeling and Simulations 2019 The influence of imperfections on dynamic properties of oscillating rod Abstract
Vladimir Dekys, Pavol Novak, Dragan Milosavljevic, Marek Nekoranec, Ondrej Stalmach
 
Machine Modeling and Simulations 2019 The influence of iron-ore concentrate on the kinetics of curing and aging processes of butadiene-styrene rubber based blends in presence of different accelerators Abstract
Aram A. Khachaturov, Evgenii E. Potapov, Darina Ondrušová, Mariana Pajtášová, Jan Krmela, Vladimíra Krmelová
 
Machine Modeling and Simulations 2018 The influence of joining technique on the deformation of laser welded T-joints Abstract
Wiesława Piekarska, Zbigniew Saternus, Milan Sapieta, Peter Kopas
 
Machine Modeling and Simulations 2019 The influence of the limit stress value on the sublimation rate during the dry ice densification process Abstract
Jan Górecki, Aleksandra Fierek, Krzysztof Talaśka, Krzysztof Wałęsa
 
Machine Modeling and Simulations 2018 The influence of the piercing punch profile on the stress distribution on its cutting edge Abstract
Dominik Wojtkowiak, Krzysztof Talaśka
 
Machine Modeling and Simulations 2018 The influence of the riser dimensions on the effectiveness of feeding solidifying cast elements Abstract
Leszek Sowa, Tomasz Skrzypczak, Paweł Kwiatoń
 
Machine Modeling and Simulations 2017 The influence of the structure on the fatigue properties of aluminium alloys for the casting Abstract
Milan Uhríčik, Peter Palček, Mária Chalupová, Martin Frkáň
 
Machine Modeling and Simulations 2017 The material parameters for computational modeling of long-fibre composites with textile Abstract
Jan Krmela, Vladimíra Krmelová
 
Machine Modeling and Simulations 2019 The monitoring system of the grinding for polymers and biological products Abstract
Marek Macko, Józef Flizikowski, Krzysztof Tyszczuk, Grzegorz Śmigielski, Adam Mroziński
 
Machine Modeling and Simulations 2018 The numerical analysis of the interaction between the low-order Lamb wave modes and the surface breaking cracks Abstract
Michal Šofer, Petr Ferfecki, Martin Fusek, Pavel Šofer, Renata Gnatowska
 
Machine Modeling and Simulations 2019 The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft Abstract
Grzegorz Jan Domek, Andrzej Kołodziej, Ireneusz Dziubek
 
Machine Modeling and Simulations 2018 The problems of measuring the temperature of the small engines (SI) on the example of a drive for non-road mobile machines Abstract
Łukasz Warguła, Konrad Jan Waluś, Piotr Krawiec
 
Machine Modeling and Simulations 2019 The requirements for the design of dual-mass flywheels Abstract
Robert Grega, Lenka Jakubovičová, Milan Sága
 
Machine Modeling and Simulations 2019 The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper Abstract
Łukasz Warguła, Piotr Krawiec
 
Machine Modeling and Simulations 2017 The role of inflow boundary layer thickness for numerical modelling of flow around bluff bodies of built-up areas Abstract
Renata Gnatowska
 
Machine Modeling and Simulations 2017 The space distribution and transfer of positioning errors from actuators to the TCP point of parallel mechanism Abstract
Vladimír Bulej, Ján Stanček, Ivan Kuric, Ivan Zajačko
 
Machine Modeling and Simulations 2017 The stability analysis of two-wheeled vehicle model Abstract
Juraj Gerlici, Vladimir Sakhno, Alla Yefymenko, Vladimir Verbitskii, Alexandr Kravchenko, Kateryna Kravchenko
 
Machine Modeling and Simulations 2019 The study of mechanical properties of magnetorheological elastomers under compressive stress Abstract
Mateusz Kukla, Aleksandra Fierek, Maciej Berdychowski, Michał Kończak
 
Machine Modeling and Simulations 2018 The temperature distribution during heating in hot plate welding process Abstract
Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki, Dominik Wilczyński
 
Machine Modeling and Simulations 2019 The threaded part wear of the tensioner with lock nut Abstract
Petra Kováčiková, Andrej Dubec, Daniela Koštialiková
 
Machine Modeling and Simulations 2017 The use of CAD applications in the design of shredders for polymers Abstract
Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski, Józef Flizikowski, Adam Mroziński
 
Machine Modeling and Simulations 2017 The welded CNC machine tool frame Abstract
Piotr Boral, Tadeusz Nieszporek, Rafał Gołębski
 
Machine Modeling and Simulations 2017 Thermal load non-uniformity estimation for superheater tube bundle damage evaluation Abstract
Martin Naď, Zdeněk Jegla, Tomáš Létal, Pavel Lošák, Jiří Buzík
 
Machine Modeling and Simulations 2019 Thermal-stress analysis of vulcanization molds to determine the dilatation gap between aluminum segments Abstract
Milan Vaško, Milan Sága, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly V. Muraviev, Olga V. Muravieva
 
Machine Modeling and Simulations 2019 TIGHTNESS OF FLANGE JOINTS: A CASE STUDY Abstract
Pavel Lošák, Tomáš Létal, Martin Naď, Marek Pernica
 
Machine Modeling and Simulations 2017 Timing belt in power transmission and conveying system Abstract
Grzegorz Jan Domek, Piotr Krawiec, Michał Wilczyński
 
Machine Modeling and Simulations 2019 Topology optimization of B-pillar with respect to mesh type and size Abstract
Zdenek Chval, Karel Ráž
 
Machine Modeling and Simulations 2017 Transformation of heat into mechanical energy by means of rotating systems Abstract
Marian Mešina
 
Machine Modeling and Simulations 2018 Transient analysis of FGM plates bending under thermal loading: comparative study within classical and generalized thermoelasticity Abstract
Ladislav Sátor
 
Machine Modeling and Simulations 2017 Transmuted Weibull distribution and its applications Abstract
Ivana Pobočíková, Zuzana Sedliačková, Mária Michalková
 
Machine Modeling and Simulations 2017 Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer Abstract
Michal Sajgalik, Tatiana Czánová, Lucia Zauskova, Mário Drbúl, Marek Sadílek, Jan Valíček
 
Machine Modeling and Simulations 2017 Universal compact lower limb turning module intended for use in orthotic robots Abstract
Mateusz Janowski, Danuta Jasińska-Choromańska, Dymitr Osiński, Marcin Zaczyk
 
Machine Modeling and Simulations 2017 Use of risk assessment methods in maintenance for a more reliable rolling stock operation Abstract
Juraj Grenčík, Roman Poprocký, Jana Galliková, Peter Volna
 
Machine Modeling and Simulations 2017 Use of the BOINC system for distributed data collection in the "Internet of Things" Abstract
Marián Handrik, Jana Handriková, Lenka Jakubovičová
 
Machine Modeling and Simulations 2017 Use of waste materials in rubber matrix Abstract
Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Slavomíra Božeková, Róbert Janík, Beáta Pecušová, Lukáš Raník
 
Machine Modeling and Simulations 2018 Using of alternative fillers based on the waste and its effect on the rubber properties Abstract
Mariana Pajtášová, Darina Ondrušová, Zuzana Mičicová, Robert Janik, Ivan Labaj, Marcel Kohutiar, Beáta Pecušová, Katarína Moricová
 
Machine Modeling and Simulations 2019 Using of wood ash as the alternative filler for preparation of rubber mixtures Abstract
Andrea Feriancová, Beáta Pecušová, Mariana Pajtášová, Katarína Moricová
 
Machine Modeling and Simulations 2017 Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding Abstract
Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski, Adam Mroziński
 
Machine Modeling and Simulations 2017 Utilization of educational machine tool for training of technical diagnostics based on positioning performance Abstract
Miroslav Císar, Ivan Kuric, Nadežda Čuboňová, Ivan Zajacko, Tomáš Dodok, Anna Rudawska
 
Machine Modeling and Simulations 2018 Validation of traffic noise models Abstract
Andrzej Bąkowski
 
Machine Modeling and Simulations 2019 Vehicle collision simulation based on non-classic tire traces Abstract
Michał Śledziński, Andrzej Lewandowski
 
Machine Modeling and Simulations 2017 Vibration of the steel frame of the primary sand classifier Abstract
Josef Soukup, Blanka Skočilasová, Jan Skočilas
 
Machine Modeling and Simulations 2017 Wear evaluation of elements of V-belt transmission with the application of optical microscope Abstract
Piotr Krawiec, Konrad Waluś, Łukasz Warguła, Jarosław Adamiec
 
Machine Modeling and Simulations 2018 WEAR EVALUATION STUDY OF THE MULTIPLE GROOVED PULLEYS WITH OPTICAL METHOD Abstract
Piotr Krawiec, Łukasz Warguła, Konrad Waluś, Jarosław Adamiec
 
Machine Modeling and Simulations 2017 Wear research of railway wheelset profile by using computer simulation Abstract
Lukáš Smetanka, Pavol Šťastniak, Jozef Harušinec
 
Machine Modeling and Simulations 2018 Wheelset / rail geometric characteristics and contact forces assessment with regard to angle of attack Abstract
Tomáš Lack, Juraj Gerlici, Pavol Šťastniak
 
Machine Modeling and Simulations 2018 Wheelset / rail geometric characteristics and contact forces assessment with regard to wheelset rolling Abstract
Juraj Gerlici, Tomáš Lack
 
Machine Modeling and Simulations 2017 Y25 freight car bogie models properties analysis by means of computer simulations Abstract
Tomáš Lack, Juraj Gerlici
 
1 - 413 of 413 Items


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.

Web page supported by Univerzity of Žilina.